Data Sheet

• Operating speed: 0.24sec/60degree (7.4V)
• Stall torque: 15.0kg-cm/529 oz-in.(7.4V)
• Temperature Range: -20C to +60C
• Operating Voltage: 4.8V to 7.4V
• 3 pole ferrite
• Dual ball metal bearing
• All metal gears
• connector wire length: 32cm
• Futaba 3f (25 teeth) for driving spline/shaft
• 6.2mm spline (including teeth)
Your Future is Green
You care about energy consumption with electronics. This is why EZ-Robot designed an innovative
low energy digital switching power supply for our products. While most electronics dissipate heat to
lower voltage, our products use an energy efficient power supply which generates practically no heat!
Welcome to the future.
Includes
• 1x EZ-B v4 WiFi Robot Controller
• 1x EZ-Builder Control Software with Apps
• 1x Rover Body - Shell
• 2x 3 Servo-motor Arm with Gripper
• 1x Lever Servo-motor
• 1x Rotation Servo-motor
• 1x LiPo Battery 7.4VDC 1300mAh
• 1x LiPo Battery Balancer Charger
• 2x Extension Cable
• 1x EZ-Robot EZ-B v4 Camera
• 1x 2.5 Amp Motor Controller
• 2x Wire Spiral Wrap (6" length)
Dimensions
• Width: 23cm
• Length: 24cm
• Height: 32cm
• Weight: 3.800kg