Owner's manual

SATA HDD Duplicate Controller Manual

Once the scan is complete, the LCD will display the corresponding results

PreScan OK!

Attention: This is Function 3 of 1-1 HDD duplicator.

3.6 ReScan Bus

Choose option 6 from the menu:

6. ReScan BUS

Press ENT to re-scan hardware. The LCD will display the following info.

Re-Scan BUS NOW?

Yes

When the scan is complete the LCD will display the following info.

Bus re- scan OK!

Attention: This is Function 4 of 1-1 HDD duplicator.

3.7 Source Size

Source Size is used to show the capacity message of the source hard disk.

Choose option 7 from the menu:

7. Source Size

Press ENT and the LCD will show the following info.

HDD:Hitachi

Size:232.9GB

Then press ENT and the LCD will show the data's size info.

HDD:Hitachi

Data:200.9GB

Attention: This is Function 5 of 1-1 HDD duplicator.

3.8 Set up

Setup allows various system settings to be changed. There are 13 sub-options: Language, Copy

Size, Startup Menu, Auto Compare, Button Sound, Device Info, System Info, Fast Copy, Auto

Start Drive, Auto Start Timer, Tolerance Size, BootTime Delay and Quick Compare.

Choose option 8 from the menu:

8. Setup

Attention: This is Function 6 of 1-1 HDD duplicator.