Instructions / Assembly

Page | 3
1.
GETTING STARTED
1.1 Read this instruction manual in its entirety before use and follow all instructions before and during use.
1.2 Before use with mobility equipment, refer to your mobility equipment's owner guide for acceptable
incline usage, including proper slope/incline, chair direction, etc.; never exceed its recommendations.
1.3 Before each use, check the ramp for worn, loose, or damaged parts. If you find any of these conditions,
do not use the ramp.
1.4 Confirm that all package contents are present. Open the shipping box and inspect for damaged or
missing parts. If damaged or missing parts are noted, do not use the ramp.
2.
PACKAGE CONTENTS
Package contents will vary depending on ramp size purchased.
QTY DESCRIPTION IMAGE (NOT SHOWN TO ACTUAL SIZE)
1
EZ-ACCESS® TRANSITIONS® MODULAR ENTRY RAMP
(TMER 3 SHOWN)
4
SCREW
#10-24 X 1/2” THREAD CUTTING SLOTTED HEX
WASHER HEAD SCREW
(If TMER 1, TMER 1.5, or TMER 2 was purchased)
8
SCREW
#10-24 X 1/2” THREAD CUTTING SLOTTED HEX
WASHER HEAD SCREW
(If TMER 3 or TMER 4 was purchased)
12
SCREW
#10-24 X 1/2” THREAD CUTTING SLOTTED HEX
WASHER HEAD SCREW
(If TMER 5 or TMER 6 was purchased)
4
SCREW
1/4” X 1" LONG SELF DRILLING, SELF TAPPING PAN
HEAD PHILLIPS
1 INSTRUCTIONS