Specification

TRANSITIONS®

Angled Entry Plate

Technical Specifications

13761 06-30-17

All text and/or images contained in this document are proprietary and may not be shared, modified, distributed,

reproduced or reused without the express written permission of Homecare Products, Inc.

MODEL

TAEP 08

TAEP 10

TAEP 12

OVERALL DIMENSIONS

8” x 32”

10” x 32”

12” x 32”

HEIGHT (PLATE ONLY)

0.695”

USABLE HEIGHT

Up to 1.3125”

Up to 1.625”

Up to 2”

RATED LOAD (DO NOT EXCEED)

700 lbs., 350 lbs. per caster or

wheel

700 lbs., 350 lbs. per caster or

wheel

700 lbs., 350 lbs. per caster or

wheel

WEIGHT

3.5 lbs.

4.25 lbs.

5 lbs.

APPLIED SLIP-RESISTANT SURFACE



WARRANTY

Lifetime Limited

Weights and dimensions are approximate and subject to change.

DRAWING DIMENSIONS ARE SHOWN IN INCHES

PAGE 1
TRANSITIONS® Angled Entry Plate Technical Specifications MODEL OVERALL DIMENSIONS HEIGHT (PLATE ONLY) USABLE HEIGHT RATED LOAD (DO NOT EXCEED) WEIGHT APPLIED SLIP-RESISTANT SURFACE WARRANTY TAEP 08 8” x 32” 0.695” Up to 1.3125” 700 lbs., 350 lbs. per caster or wheel 3.5 lbs.  Lifetime Limited TAEP 10 10” x 32” 0.695” Up to 1.625” 700 lbs., 350 lbs. per caster or wheel 4.25 lbs.  Lifetime Limited TAEP 12 12” x 32” 0.695” Up to 2” 700 lbs., 350 lbs. per caster or wheel 5 lbs.