Instructions / Assembly

Page | 3
GETTING STARTED
1. Read this instruction manual in its entirety before use and follow all instructions before and during use.
2. Before use, refer to your mobility equipment's owner guide for acceptable ramp usage, including proper
slope/incline, chair direction, etc.; never exceed its recommendations.
3. Before each use, check the ramp for worn, loose, or damaged parts. If you find any of these conditions, do not
use the ramp.
4. Confirm that all package contents are present. Open the shipping box and inspect for damaged or missing
parts. If damaged or missing parts are noted, do not use the ramp.
PACKAGE CONTENTS
QTY DESCRIPTION IMAGE (NOT SHOWN TO ACTUAL SIZE)
1 EZ-ACCESS® SUITCASE® TRIFOLD® AS RAMP
2 CLEVIS PIN
2 HINGE PIN
1 INSTRUCTIONS
CARE AND MAINTENANCE
1. Before each use, check the ramp for worn, loose, or damaged parts. If you find any of these conditions, do not
use the ramp.
Do not tamper with, attempt to repair, or modify any portion of the ramp.
2. Keep the ramp surface clear of ice, snow, dirt, leaves, and other debris. For ice and or snow, remove all
accumulations and sweep surface clean. For dirt, leaves, and other debris, sweep surface or wash with a soft
bristle brush and non-alkaline detergent; rinse well.
The ramp surface may be slippery in wet conditions. Use caution if surface is wet as traction may be
reduced.
3. Store the ramp in a cool, dry place when not in use.