Instructions SUITCASE® Singlefold AS Ramp Portable ramp for temporary or semi-permanent use 10266 REV 05-27-2021 Patented. LIFETIME WARRANTY. Please register at www.ezaccess.com/warranty-satisfaction. CE Technical Files kept at: Enable Access, Marshmoor Works Great North Road, North Horth Mymms Hatfield, AL9 5SD, UK. © EZ-ACCESS®, a division of Homecare Products, Inc. All rights reserved.
SYMBOLS The WARNING symbol indicates a potentially hazardous condition/situation. The warnings throughout this document, and on your equipment, if any, are for the protection of people and property. Failure to abide by warnings will result in a waiver of all liabilities, loss of your warranty, and could result in equipment damage and or failure, property damage, risk of serious bodily injury, and or death to operators, riders, and those nearby.
GETTING STARTED 1. Read this instruction manual in its entirety before use and follow all instructions before and during use. 2. Before use, refer to your mobility equipment's owner guide for acceptable ramp usage, including proper slope/incline, chair direction, etc.; never exceed its recommendations. 3. Before each use, check the ramp for worn, loose, or damaged parts. If you find any of these conditions, do not use the ramp. 4. Confirm that all package contents are present.
SET UP AND USE 1. The ramp is shipped fully assembled. To unfold for use, position the folded ramp so that the top lip transition plate (located on the end of the ramp that is labeled TOP) fully overlaps a secure, unobstructed, level landing and is securely supporting the ramp (FIG. 1). 2. Unfold the ramp, exposing the applied slip-resistant tread surface, then center the ramp on the upper landing (FIG. 2). 3.
. For stowage and transportation, or for loading unoccupied mobility equipment with a wider wheelbase, the ramp can be separated into two halves (FIG. 4) by removing (2 ea.) hinge bolts and nylon locknuts (FIG. 5). The ramp may be separated for use when loading or unloading unoccupied mobility equipment only. When the ramp is used with occupied mobility equipment, ensure that the ramp halves are rejoined as described in ‘STEP 9’. 6.
OPTIONAL ACCESSORY 1. If the ramp’s top lip transition plates are not long enough to fully overlap a secure, unobstructed, level landing, a SUITCASE® Top Lip Extension (‘TLE’) is an available option that increases the standard 3” reach of the top lip transition plates to 9”, in many cases, allowing the ramp to clear an obstruction to create a smooth transition. Visit www.ezaccess.com or call 1-800-451-1903 for more information. Use of the TLE reduces overall ramp weight capacity to 500 lbs.
