Instructions / Assembly

PATHWAY
®
Aluminum Wheelchair Ramp Kit
Page 32 of 39
1
6.3. U-SHAPED CLOSURE
6.3.1. Closures for a U-shaped configuration are created using the same method described in
the preceding section.
6.3.2. Install the upper rail, curb, and lower rail as described in ‘HANDRAILS’.
6.3.3. FIG. 6.13 shows the completed assembly.
FIG. 6.13
RAMPS ASSEMBLED IN U-SHAPED
CONFIGURATION
PLATFORMS ASSEMBLED IN U-SHAPED
CONFIGURATION (5’ X 5’ PLATFORMS SHOWN)