Instructions / Assembly

PATHWAY
®
Aluminum Wheelchair Ramp Kit
Page 37 of 39
1
8.2. RAMP LOWER TRANSITION
When using the landing pad, the ramp lower transition replaces the ramp ground transition at the
end of the ramp system.
8.2.1. Lift the end of the ramp and install the lower transition as shown (FIG. 8.3).
8.2.2. Slide the landing pad underneath the lower transition and end of the ramp. Make sure the
landing pad is oriented so that the side marked for ramp attachment is at the end of the ramp.
8.2.3. Ensure that the lower transition extends fully onto the pad.
8.2.4. Attach ramp’s lower transition to the landing pad using two provided 1/4” self-drilling screws
(FIG. 8.4).
FIG. 8.3
FIG. 8.4