Instructions / Assembly

PATHWAY
®
Aluminum Wheelchair Ramp Kit
Page 28 of 39
1
6.1.6. Cut the 1-1/2″ diameter round tube to the length measured less 1/16” (FIG. 6.3).
6.1.7. Using a metal file, smooth any sharp edges from the cutting.
6.1.8. Disassemble the adjustable elbow by removing the screw, nut, and center insert (FIG. 6.4).
6.1.9. Install an elbow half into the end of the cut tube which will attach to the ramp handrail and a
5/16”-18 round threaded insert into the end which will attach to the post (FIG. 6.3).
6.1.10. Tighten internal set screws of the adjustable elbow (FIG. 6.4).
FIG. 6.3
FIG. 6.4