Instructions / Assembly

Page 10 of 39
1
3. PLATFORMS
3.1. INSTALL PLATFORMS
If your configuration does not include a platform, skip to ‘CONNECT RAMP SECTIONS’.
Platform handrails are shown for clarity of how to orient platforms in various configurations. It is
strongly suggested that all platforms and ramps be installed before installing handrails (see
‘HANDRAILS).
3.1.1. There are three basic platform arrangements (one or more of these arrangements may
be used in an installation). All require the same procedure for assembly except for FIG.2.3
which requires an additional PPPC (PLATFORM TO PLATFORM CONNECTOR).
FIG. 3.1 Straight
FIG. 3.2 L-shaped
FIG. 3.3 U-shaped
Two 5' x 5' platforms shown combined to make a 5' x 10U-shaped.
FIG. 3.1
FIG. 3.2
FIG. 3.3