Instructions / Assembly

PATHWAY
®
Aluminum Wheelchair Ramp Kit
Page 19 of 39
1
4.4. INSTALL UNIVERSAL ANGLE BRACE – RAMPS
If the walking surface is over 36″ high, a PUAB (UNIVERSAL ANGLE BRACE) must be installed
under the ramp (FIG. 4.8).
4.4.1. Angle Braces (braces) come in pairs; use one pair per ramp connection.
4.4.2. The brace bands are installed on ramp legs in the same manner as platform legs (refer to
‘INSTALL UNIVERSAL ANGLE BRACE – PLATFORMS’).
4.4.3. The opposite end of the brace is attached to the bottom of the ramp (near the center of
the tread at the end of the ramp) using a 1/4″ x 1” long self-drilling screw.
Ensure that all braces are secured before using the ramp.
FIG. 4.8