Specification

ManualsBrandsEZ-ACCESS ManualsAccessibility RampsPATHWAY HD 16 ft. Aluminum Code Compliant Modular Wheelchair Ramp System

Manufactured in the USA

proprietary and may not be shared, modified, distributed, reproduced, or reused without the

express written permission of EZ-ACCESS

, a division of Homecare Products, Inc.

18555 REV 02-06-19

PATHWAY® HD

Code Compliant Modular Access System

TECHNICAL SPECIFICATIONS

Summary of content (8 pages)

PAGE 1
PATHWAY® HD Code Compliant Modular Access System TECHNICAL SPECIFICATIONS Manufactured in the USA © Homecare Products, Inc. All rights reserved. All text and images contained in this document are proprietary and may not be shared, modified, distributed, reproduced, or reused without the express written permission of EZ-ACCESS®, a division of Homecare Products, Inc.
PAGE 2
OVERVIEW SCOPE OF WORK: PROVIDE PREFABRICATED MODULAR ALUMINUM ACCESS RAMPS AND STEPS 1. SUBMITTALS 1.1 Product Literature must be submitted with bid. 1.2 Warranty must be submitted with bid. 1.3 Shop Drawings: Include detailed shop drawings upon receipt of purchase order. 1.4 Engineering: Provide sealed professional engineering drawings or empirical independent test results upon request. 2. QUALITY ASSURANCE 2.1 Manufacturer: EZ-ACCESS, a division of Homecare Products, Inc., 700 MILWAUKEE AVE.
PAGE 3
.2 3.3 3.4 LANDINGS/PLATFORMS 3.2.1 Engineering 3.2.1.1 Landings/platforms shall be designed for a minimum uniform live load of 100 pounds per square foot and a concentrated static vertical load of 300 pounds. 3.2.2 Materials 3.2.2.1 Landings/platforms shall be constructed of 6000 series aluminum alloy with 6061-T6 or 6005-T5 for primary structural components. 3.2.3 Design 3.2.3.
PAGE 4
3.5 GUARDS AND HANDRAILS 3.5.1 Engineering 3.5.1.1 Guards and handrails shall be designed to resist a single concentrated load of 200 pounds applied at any point and in any direction at the top of the guardrail or handrail and to transfer this load through the supports to the structure. 3.5.1.
PAGE 5
DIMENSIONAL SPECIFICATIONS Unless otherwise specified, weights are expressed in pounds; lengths and widths in inches. Ramps 48” WIDE RAMPS 2’ RAMP 3’ RAMP 4’ RAMP 5’ RAMP 54” WIDE RAMPS 6’ RAMP 2’ RAMP 3’ RAMP 4’ RAMP 5’ RAMP 6’ RAMP Made with Aircraft Grade Aluminum           Slip Resistant Walking Surface           28.5 41.3 54.1 66.9 79.8 31.2 45.3 59.3 73.4 87.
PAGE 6
Platforms/Landings 5’ x 5’ 5’ x 6’ 5’ x 6’ 6’ x 6’ 5’ x 7’ 5’ x 7’ Made with Aircraft Grade Aluminum       Slip Resistant Walking Surface       91.8 92.2 92.2 108.9 104.2 104.2 109.2 111.3 125.3 128 125.1 139.1 111.7 133.8 164.3 150.5 150.2 180.7 Frame (Top Rail) Height 1 42” 42” 42” 42” 42” 42” Frame Midrail Height 1 22” 22” 22” 22” 22” 22” Landing/Platform Weight w/o Rail (lbs.) Landing/Platform w/Two-Line Rail (lbs.
PAGE 7
RAMP & LANDING/PLATFORM Plan View Isometric View 7
PAGE 8
RAMP & LANDING/PLATFORM (CONT’D).