Dimensions Guide

ARCHITECTURAL SPECS
Part 1 – General
1.1 DESCRIPTION OF PRODUCT
a. The product described herein, manufactured by EZ-ACCESS (‘manufacturer’), is an aluminum modular ramp
consisting of ramp sections, platforms, rails, and supports that are selected to provide adequate ramping height.
1.2 QUALITY ASSURANCE
a. The ramp may be subject to state, local, and city approval prior to installation and subject to inspection after
installation.
1.3 REFERENCE CODES
a. Americans With Disabilities Act Handbook (published by the Equal Employment Opportunity Commission and
the U.S. Department of Justice, publication EEOC-BK-19).
1.4 SUBMITTALS
a. Shop drawings by contractor or manufacturer’s literature for approval. Drawings shall indicate layout, unit
locations, unit identification, connections details, support items, and dimensions.
b. A sample of the ramp treads showing slip resistant ramp surfaces.
1.5 DELIVERY AND HANDLING
a. The contractor shall inspect the components upon delivery to ensure that the proper materials have been
received and are not damaged or defective. Damaged or defective materials shall be removed from the site.
1.6 FIELD MEASUREMENTS
a. Verify that field measurements are as indicated on the placement of plans.
1.7 WARRANTY – LIMITED LIFETIME
a. The manufacturer shall have in writing a limited lifetime warranty against any defect in materials and
workmanship.