Instructions / Assembly

Page 32 of 74
4.5.4. For Vertical Picket platform handrails, pre-assemble the handrails by inserting a
5/16”-18 x 1” long hex bolts through a 5/16” flat washer, the angle post, and into a
5/16”-18 round threaded insert in the handrail or square threaded insert in the
vertical pickets. Use the holes shown in FIG. 4.8.
FIG. 4.8
4.5.5. For Horizontal Picket platform handrails, pre-assemble the handrails by inserting a
5/16”-18 x 1” long hex bolt through a 5/16” flat washer, the angle post, and into a
5/16”-18 round threaded insert in the handrails and curb. Use the holes shown in
FIG. 4.9.
FIG. 4.9