Instructions / Assembly

Page 59 of 74
6.2.1.1. Install one 1/4” x 1” long hex washer head self-drilling screw through the
hole in the end loop attachment plate into the ramp handrail post and
tighten securely (FIG. 6.6).
FIG. 6.6
6.3. INSTALL RAMP HANDRAIL END CAPS
6.3.1. Use plastic end caps when there are any remaining open ends on the handrails (FIG.
6.7). Push them on by hand or use a rubber mallet. If necessary, use construction
adhesive to bond the cap to the ramp handrail.
FIG. 6.7