Manualshelf

Instructions / Assembly

ManualsBrandsEZ-ACCESS ManualsHealth and wellnessPATHWAY 3G 8 ft. Wheelchair Ramp Kit with Expanded Metal Surface and Two-line Handrails
61626364656667686970
1
PATHWAY
®
3G Modular Access System Assembly Manual Page 65 of 77
7.4. LANDING PAD
7.4.1.
The PLP (LANDING PAD) is used at the bottom of a ramp or ramp run to assist mobility on
soft ground. Contour the ground to remove any high or low areas which would prevent
portions of the Landing Pad from contacting the ground.
The underside of the Landing Pad must be fully supported by the ground. It should
never be used in an elevated position like a ramp or a platform.
7.4.2.
Slide the bottom plate into one of the three available slots (FIG. 7.5).
The ramp must be installed on the side marked for ramp attachment.
7.4.3.
After installing the bottom plate, install #8-32 hex washer head thread cutting screws into
the screw slots on both sides (FIG. 7.6).
FIG. 7.5
FIG. 7.6