Instructions / Assembly

PATHWAY

3G Modular Access System Assembly Manual Page 42 of 77

4.6.8.

Insert one half of the elbow into the ramp handrail and the other half into the leg of the

handrail extension above the connector plate (FIG. 4.15).

4.6.9.

Let the connector plate rest against the ramp handrail post and reassemble the adjustable elbow.

4.6.10.

Secure the connector plate to the ramp handrail post using a 1/4”-20 x 1” self-drilling, self-

tapping hex washer head screw (FIG. 4.15).

4.6.11.

Attach a Bolt-On Stub Rail to the ramp handrail post on the opposite side of the welded “H”.

Center the 1-1/2” diameter tube of the Bolt-On Stub Rail with respect to the ramp handrail

lower rail and secure using a 1/4”-20 x 1” self-drilling, self-tapping hex washer head screw

(FIG. 4.16).

FIG. 4.15

FIG. 4.16