Full Product Manual

1
PATHWAY
®
3G Modular Access System Assembly Manual Page 17 of 77
2.6. LOW PROFILE PLATFORM
2.6.1. Low profile platforms are 1-9/16” thick (tall) as compared to standard platforms which
are approximately 3-1/2” thick (tall).
2.6.2. There are three types of low profile platforms (one or more of these platform
arrangements may be used in an installation).
FIG. 2.9 Low profile platform straight configuration
FIG. 2.10 Low profile platform turn configuration
FIG. 2.11 Low profile platform turn back configuration (two 5’ x 4’ platforms
shown combined to make a 5’ x 8’ turn back)
2.6.3. All three require the same procedure for assembly except for the turn back (FIG. 2.11)
which requires an additional PPPC (PLATFORM TO PLATFORM CONNECTOR).
2.6.4. Low profile platforms can be elevated when used with support tubes and feet or set
directly on the ground and used as a landing pad (FIG. 2.12). When used as a landing pad, it
may be used with or without handrails and will require a low profile ground transition.
FIG. 2.9
FIG. 2.10
FIG. 2.11
FIG. 2.12