Full Product Manual

PATHWAY

3G Modular Access System Assembly Manual Page 12 of 77

2. PLATFORMS

2.1. INSTALL PLATFORMS

If your system does not include a platform, skip to ‘CONNECT RAMP SECTIONS’.

Platform handrails are shown for clarity on how to orient platforms in various configurations. It

is strongly suggested that all platforms and ramps be assembled before installing handrails (see

‘HANDRAILS’ section).

2.1.1.

There are four basic platform arrangements (one or more of these arrangements may be

used in an installation). All four require the same procedure for assembly except for FIG. 2.3

which requires an additional PPPC (PLATFORM TO PLATFORM CONNECTOR).

FIG. 2.1 Straight configuration

FIG. 2.2 Turn configuration

FIG. 2.3 Turn back configuration (two 5’ x 4’ platforms shown combined to

make a 5’ x 8’ turn back)

FIG. 2.4 8’ x 5’ turn back

FIG. 2.1

FIG. 2.2

FIG. 2.3

FIG. 2.4