Instructions / Assembly

Page 6 of 6
3. PLATFORM CANOPY INSTALLATION (OPTIONAL EQUIPMENT)
3.1 Remove handrails from system (if installed) and set aside.
Use extreme caution on platform when no handrails are present.
3.2 Insert 1-1/2” square canopy posts into platform corner pockets (FIG. 5).
3.3 Set canopy roof on canopy posts. Insert top of canopy posts into canopy roof corner pockets and tighten corner
pocket set screws (FIG. 5).
3.4 Insert 5/16”-18 x 3-1/2” button head socket cap screws, 5/16” flat washers, and 5/16”-18 locknuts as shown (with
the locknuts on the inside) to attach handrails to the canopy posts (FIG. 6). Tighten all fasteners securely.
3.5 Install 1/4” x 1” pan head Phillips self-tapping screws through the existing holes in the platform corner pockets into
the 1 1/2” square canopy posts (FIG. 6). Pre-drill 1/8” pilot holes in the canopy posts if needed.
3.6 Ensure all fasteners are in place and tightened securely.
Regularly check and tighten fasteners as needed.
FIG. 5
FIG. 6