User manual

13
 In this example, P070-5m will auto display the default file “01_xxx.xxx” (theater) repeatedly.
You can touch the screen anywhere to go to 02_xxx.xxx (GENRES).
 There are 10 division buttons in 02_xxx (GENRES).
- Touch the area “1” or “5” to go to 03_xxx (CARTOON).
- Touch the area “2” or “6” to go to 04_xxx (ACTION).
- Touch the area “3” or “7” to go to 05_xxx (COMEDY).
- Touch the area “4” or “8” to go to 06_xxx (SCIENCE FICTION).
- Touch the area “9” to go to the previous frame.
- Touch the area “10” to back to 01_xxx (theater).
14
 There are 10 division buttons in 03_xxx (CARTOON).
- Touch the area “1” to go to 03_xxx (CARTOON).
- Touch the area “2” to go to 04_xxx (ACTION).
- Touch the area “3” to go to 05_xxx (COMEDY).
- Touch the area “4” to go to 06_xxx (SCIENCE FICTION).
- Touch the area “5” to go to 07_xxx in the layer 3.
- Touch the area “6” to go to 08_xxx in the layer 3.
- Touch the area “7” to go to 09_xxx in the layer 3.
- Touch the area “8” to go to 10_xxx in the layer 3.
- Touch the area “9” to go to the previous frame.
- Touch the area “10” to back to 01_xxx (theater).
8.2.3 Screen Calibration
NOTE：
：：
：The device has already been calibrated from the factory. Calibration only needed to be
performed if the screen inaccuracy is noticed.
Step 1：
：：
：Press the “EDIT” button on remote control to open the “CALIBRATION” window.
Step 2：
：：
：There are five calibration points
displayed, touch (click) and hold on the center
of calibration point “1” or the corner of the
display area (calibration points “2〜5”) until the
next calibration point changes the color from
blue to yellow.
Step 3：
：：
：Finish the calibration steps from point
“1〜5” twice, then the “CALIBRATION OK”
will appear on the screen. The calibration
window will now exit.