User manual

5
6.4 SLIDESHOW SETUP
 SLIDESHOW MODE：
：：
：Set the slideshow to start automatically.
 FOLDER REPEAT：
：：
：Set all files (picture, music or movie) in
the folder to show only once or continuously (loop).
 INTERVAL TIME：
：：
：Set the time each photo is shown to 1, 3,
5, 10, 30 or 60 seconds.
 TRANSITION (EFFECT)：
：：
：Set the transition effect and auto
slide with sequential or random playback.
 AUTO START：
：：
：Enable/ disable auto playing media files on the memory card when the device
is turned on.
6.5 PREFERENCE
 TV TYPE: Choose the TV TYPE.
• MULTI . SYSTEM：
：：
：Set the TV type automatically.
• NTSC: Set the TV type to NTSC.
• PAL: Set the TV type to PAL.
 VIDEO OUTPUT：
：：
：Select the video output mode.
 SCREEN TYPE：
：：
：Set the screen type to 16：9 or 4：3.
 OSD LANG: Select the OSD language (ENGLISH, FRENCH, GERMAN, ITALIAN,
JAPANESE, PORTUGUESE, SPANISH and NEDERLANDS).
 OSD MESSAGE: Turn the OSD message function on/ off.
 RESET: Reset all settings to the original (factory) settings.
 FIRMWARE : New F/W can upgraded from the memory card.
• EDITION : Show the F/W versions.
• UPDATE : Used to update the F/W.
6
Copy files (music, picture and movie) to the memory card first.
7.1 PLAY PICTURE FILE
Step 1: Press the “SLIDE” button on the remote control from any menu.
Step 2: The preview mode will show all the picture files on the memory card.
Use the “▲、▼、
▲
、
▼
” buttons to select the picture file, and press the “ENTER”
button to play the picture file.
Step 3: If the “SLIDESHOW MODE” is disabled, press the “NEXT” button to play the next
picture file, the “PREV” button to play the previous file.
7. USING THE P
070
-
5m