Instruction manual

7.4 OTHER SETUP

 Play OSD Display: Enable or disable the OSD display.

 Auto Play

Movies: Auto play movie files on the CF card after power on.

Pictures: Auto play picture files on the CF card after power on (slideshow function).

All Files: Auto play all files (movie and picture files) on the CF card after power on.

MultiLayer: Directly execute Multiple Display function after power on.

HDMI-In: Auto play the live video from HDMI output device (DVD or PC) after power on

Off: Turn off the Auto Play function.

 SlideShow Interval: Set the time each photo is shown to 10, 15, 30 seconds or 1, 10, 15, 30

minutes or 1 hour. .

 Lock Remote Controller: Enable/ disable the auto key lock function. (The B1080PX-4 will auto

lock when there is no further input for 1 minute.)

 Lock Password Setup: Press the “Enter” button to open the “Set Password” window. Enter the

password with numeric buttons and press the “Enter” button to save the new password (The

default password: 123).

7.4 OTHER SETUP (continued)

 Export Setting File: Press the “Enter” button to export the configuration value to the CF card.

Step1: Copy the file “HDPlayerSetting.txt” on CF card to your PC. Use the “Wordpad” to open the file,

and you can see all the configuration value of B1080PX-4.

Step2: You can modify directly the configuration value on your PC.

Example: [NETWORK] Disable Options: Disable, RJ45, WiFi

The “Network” function is disabled, you can directly change the mode to RJ45.

Step3: Copy the completed file “HDPlayerSetting.txt” from PC to CF card. Insert the CF card to the

B1080PX-4, the B1080PX-4 will apply the new settings automatically.

 Play Button: Only for used with play buttons. The Eyezone B1080PX-4 supports two options

(Repeat Default / Repeat All) when the demo file finishes playing.

 Log Function: Enable or disable the Log function.

 Auto Power: Enable or disable the Auto Power function. If this function is enabled, user might

set a definite time for B1080PX-4 to power on/off automatically.

 AutoPower Setting: Press “Enter” button on the remote controller, the “PowerOn” setting

window will pop up. User could set the power on/off time here.