Instruction manual

33
9.2 NETWORK
 Network
- Enable: Enable or disable the network function.
- Interface: Select your network connection Ethernet (wired) or Wireless.
 General Setup
- Enable DHCP: Enable or disable the DHCP function.
- IP/ Subnet/ Gateway/ DNS server: Enter the fixed IP address, Subnet, Gateway and DNS
for the B1080PX-4.
 Wireless Setup (only for B1080PW)
- SSID: Enter the SSID.
- Encryption mode: Select an encryption mode.
- Key/ Passphrase: The key you enter here must match the password of the device exactly.
34
9.3 SERVER
 Download from FTP Server
- Enable: Enable or disable the FTP auto download function.
- Port: The default port for FTP is 21. In most cases you should not change this number. If
the FTP site uses a port other than 21, you should enter the correct port.
- IP address: Enter the domain name or IP address of the remote FTP server.
- Path: Enter the folder path that you want to share.
- User name: Enter the user name of the remote FTP server.
- Password: Enter the password of the remote FTP server.
 Local FTP Server Setup
- Enable: Turn on/ off the B1080PX-4 server.
- Port: Enter the port of the B1080PX-4
- ID: Enter the user name of the B1080PX-4 (default ID: root).
- Password: Enter the password of the B1080PX-4 (default password: admin).
 FTP Server Address: Click on the address to directly connect to the B1080PX-4 server. Enter the
user name and password (Default User Name: root, Default Password: admin) to log on. After
logging on all the media files on the CF card will be listed. You can download and upload the media
files between CF card and your PC.