Instruction manual

31
9. HTTP COMMAND FUNCTION
 Confirm that the Eyezone B1080PX-4 is already connected to the network. (Refer to 7.1)
 Confirm the “Local HTTP Server” function has been enabled, and the “Local HTTP Server
Setup” set has been completed (refer to 7.2).
 Set your router or firewall, and open a port 80 for the Eyezone B1080PX-4. The following figure is
an example, please refer to your user’s manual of router for opening ports.
 Start IE Browser on PC and type the HTTP site or IP:
In the local PC, please type “http://192.168.1.100”.
In the remote PC, please type “http://61.30.13.40:80”.
 Type the “User Name”, “Password” and click “OK” to log on. (Default User Name: root Default
Password: admin)
 There are five items: “Control”, “Network”, “Server”, “Time” and “Features”
32
9.1 CONTROL
 Control: Select one of the control command s, and press the “Send” to control the B1080PX-4
immediately.
- Stop: Stop playback
- Play: Start playback.
- Pause: Pause the playback.
- Prev: Play the previous file.
- Next: Play the next file.
- Volume: Adjust the volume.
 Autoplay: Select the auto play mode.
- Enable: Enable or disable the auto play function.
- Movies: Auto play movie files on the CF card after power on.
- Pictures: Auto play picture files on the CF card after power on (slideshow function).
- All: Auto play all the media files on the CF card after power on.
- Multi Layer: Directly execute Multiple Display function after power on
- HDMI In: Auto play the video from HDMI source after power on.