User`s manual

[EyeMax]User’s Manual (5.1.4.0)

* Apply All: The same settings will be applied to the rest of the

cameras by clicking on “Apply All”.

* Bit per Second: It is 9600 for most of PTZ cameras. But a few

can have different values.

Refer to camera manual.

Select the port used for PTZ camera.

* Camera ID: Leave it as it is if only one PTZ camera is used.

Otherwise, give each camera a different number.

* Restore as Previous : Tick the box and set time period to move

camera back to initial position after a certain period of time.

When using a PTZ camera, check the box

and select a model name. Eyemax DVR

system supports nearly 40 different

protocols.

[PTZ Camera Setup]

PTZ Control by Drag and Drop

How to Set Up:

1. Simply ticks “Using PTZ Mouse Control” as above

and select a proper PTZ model name.

2. On a PTZ screen, drag mouse to the desired

position to see.