User`s manual

[EyeMax]User’s Manual (5.1.4.0)
36
* Video Signal Type: Select either
NTSC or PAL.
* Auto Channel Scan: It
automatically identifies all the active
video channels. Make sure to
always click and scan after S/W
version change.
* Default: It sets “Event Recording
Frame” and “Recording Frame” as
default values.
Different resolutions and recording
frame rates can be set up for
different cameras.
Cameras will be enabled by
checking the boxes.
3.6.2.1 Camera
Using Still Image :
It is a function that captures still image
when Recording schedule mode is set
as E or H.
(Caution) Under R mode at Recording
schedule, this function stop recording
the channel.
* Pre-alarm (max. 10 sec.): Length of time to be recorded before event
* Post-alarm (max. 10 min.): Length of time to be recorded after event
[Camera]
Select recording picture quality.
Double-click on “Camera”for more
individual Camera setup.