User`s manual

[EyeMax]User’s Manual (5.1.4.0)
34
3.6.1.9 Hard Disk Usage
* Port No.:
A
port number for I-Phone use has to be set up.
Normally the default value is good to use.
* Timeout: It indicates the maximum length of connection
trial. If there is no response within the value set, call will be
cancelled.
* Accept Automatically: To accept counter part’s IP-phone
connection without checking a confirmation message.
I-Phone is “Two-Way Audio Communication ”.
Check the box, go to Control Screen, and click on the I-Phone
button for audio communication. For more detailed I-Phone setup,
refer to Appendix 2.
3.6.1.10 I-Phone
Hard Disk Usage is to select data storage method. If “Once” is selected,
data will be stored up to the point where HDD reaches its maximum
capacity. If “Recycle” is selected, data will be overwritten from the point
HDD reaches its maximum capacity based on “First In First Out”.