User`s manual

USER’S MANUAL
H.264 REAL TIME DVR
31
A. Import: Imports setting values from USB memory.
B. Export: Exports setting values to USB memory.
C. Refresh: Reload files from USB memory.
⑦ [Initialization]
 You can initialize data and configuration by this menu.
A. Remove system log: Remove all log files.
B. Remove settings: Remove setting files.
i. After initializing setting all the setting values will be restored as default
values.
C. Remove recorded data: Remove all recorded data.
D. Remove all (factory default): Delete entire data in the system and restore as factory
default
Caution
USB memory stick is needed to update F/W or setting values.
Once you disconnected and reconnect USB memory, you should
press “Import” button to read list of file from USB memory.
“USB is not detected.” Message will be shown when you are to
run u
p
datin
g
without connected USB.
Notice
z If data is initialized, it can’t be recovered. Before use
“initialize”, important data must be backup.
z “Removing recorded data” makes HDD be formatted and
you will loose recorded data.