System information

[
MagicRadar
]
User’s Manual
(
5.2.0.0
)
75
Main System
Application(Control)
Tibetsystem Co.,Ltd.
74
●
Device
Select detailed schedule for actrivating sensor and alarm individnally.
(5) Network
Supported Network:
1. TCP/IP - Connecting to DVR Server from Client using Lan or DSL
2. PSTN - Connecting to DVR Server from Client using PSTN or ISDN modem
3. Not In Use - Not allowed to connect to DVR Server remotely
Port No.: The default port number is 9091.
Timeout: The time length of trials to connect to DVR Server from Client
Maximum Number of Users: The maximum number of users that can be logged in remotely.
Details: It shows all the port numbers that are available to use.
●
DVR Server
Transmitted Video Quality:
Video quality to be transmitted to Client.
As a reminder, the higher video quality gets, the
slower network transmission speed becomes.
Therefore, it is often recommended to select low
video quality when using “Narrowband”.
Bandwidth:
Make sure to select the right bandwidth to have the right network performance.
Note:
MagicRadar will automatically appoint a proper IP address to router. No router setup is required.