Table of Contents 1 Software Installation www.MagicRadar.com 7 1. Automatic Installation - Definition - Installation Method Selection - Installing Drivers - DVR File System Installation - Completion & Retry 9 9 9 9 10 13 2. Manual Installation - Definition - Installation Method Selection - Software Selection 14 14 14 14 3. Remote Client Installation - Using MagicRadar S/W - Using the Web Browser 15 15 16 4.Uninstallation 21 5.Program Execution 21 2 Main System Application 23 1.
Creative Leader in Digital Video Surveillance MagicRadar 1.
Chapter 1 Digital Video Surveillance System - MagicRadar Software Installation > Automatic Installation > Manual Installation > Remote Client Installation > Uninstallation > Program Execution
1. Automatic Installation (1) Definition It is a method to install all the relevant softwares automatically. Select “Automatic Installation” at all times unless only “MagicRadar Client” is to be installed. Software Installation Steps: 1. Insert MagicRadar S/W. 2. Double-click “MagicRadar. English(5.2.0.0).exe”. (2) Installation Method Selection (3) Installing Drivers 8 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
Software Installation (4) DVR File System Installation Definition: Occupying disk capacity to record data Steps: 1. Select drives from “Available Disk Drive Capacity” 2. Click “Add”. 3. Click “Initialization”. Caution: 1. Be very careful not to add “C Drive”, for it is used for O/S and the DVR softwares. 2. HDD has to be initialized to record data Selecting “Quick Initialization” will lead to the initialization of entire disk capacity added. Otherwise, put in desirable number to initialize.
Software Installation At least one of “available disk drive” must be added for data storage. Otherwise, the alert message will pop up. (5) Completion & Retry Retry the entire procedure if an error message is displayed. 12 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
(1) Definition 3. Remote Client Installation (1) Using MagicRadar S/W It is a method to install selected softwares manually. Select “Manual Installation” only in the case of “MagicRadar Client” installation. Software Installation 2. Manual Installation Double click “MagicRadar(5.2.0.0), exe”. (2) Installation Method Selection (3) Software Selection Select “Manual Installation”. Select “MagicRadar DVR Client” only. Note: The rest of the procedures are the same as “Automatic installation”.
Software Installation (2) Using Web Browser ❶ ❸ ❹ ❶ ❻ ❷ ❽ ❷ 1. Type in the IP address of DVR server. 2. Log in first before downloading Remote Client Program. 16 Tibetsystem Co.,Ltd. ❺ ❼ ❾ ❿ 1. Live View 2. Screen splits and channel selection 3. PTZ control : Only users with proper authority to control PTZ remotely. 4. Advanced: Controlling preset, tour and E-map only for authorized users. 5. Speed: PTZ speed control 6. To save live image to JPEG 7.
Software Installation ❶ ❷ ❸ 1, Searched Image 2. Selection for image search 3. Play back(Fast back, Back, Stop, Play, Fast Play) 4. Save: AVI, JPEG, BMP 5. Audio 6.To change Tab to CONTROL 7.Log out and go back to LOG IN page 18 Tibetsystem Co.,Ltd. ❹ ❺ ❻ ❼ 1. Click the Install Remote Client button for downloading [ MagicRadar ] User’s Manual (5.2.0.
Software Installation 4. Uninstallation 2. Click “Next” to proceed. 5. Program Execution 3. Select “Manual Installation”. 4. Click “Next” to finish Installation process. Find the icons on the desktop to execute “MagicRadar DVR” and “MagicRadar DVR Client”. Or find “MagicRadar DVR” under “All Programs”. 20 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
Chapter 2 Digital Video Surveillance System - MagicRadar Main System Application > Startup Screen > Login > Exit / Logout > System Information > Control Screen > Setup (System/Device/Event/Schedule/Network/User)
Main System Application(Control) 4. System Information 1. Startup Screen Click on System Information to see DVR system information, such as OS version, CPU, RAM, HDD, IP address, DVR model and DVR software The above screen will appear as MagicRadar DVR system starts. 5. Control Screen Network Setup 2. Login Date / Time User Mode Model Adjust The default values for User and Password are “admin” and “no password”. Click “OK” to execute MagicRadar DVR system.
Main System Application(Control) 6. Setup ● System Time Setup (1) System By clicking “System Time Setting”, users is able to set Date and Time in DVR software. ● DVR Information Create a system name and put in administrator. info. They will be displayed on outgoing e-mails. 26 Tibetsystem Co.,Ltd. Time Zone: To change Current time zone in DVR system. Internet Zone: To synchronize with Internet time server automatically. [ MagicRadar ] User’s Manual (5.2.0.
● Auto-switching Interval Auto-switching Interval is a function that allows green square around selected camera to move to the next one at the interval set. Period : Select a day that DVR system reboots automatically by the period. Reserved time : Time set to shut down or to reboot DVR system e.g.
Main System Application(Control) Click on the E-map button positioned next to the I-phone button to open E-map. White Camera : Not on Recording, Yellow Camera: On Recording, White Input/White Output : Not Activated, Yellow Input/Yellow Output: Activated ● TV-OUT TV-OUT is a function that sends selected cameras to a call monitor (external analog monitor). Click on the “TV-OUT” button for setup. The above is a designed E-map sample. Drag mouse to position Camera/Input/Output and design E-map.
Main System Application(Control) ● On-screen Display The Number of TV-out Supported Font Settings: Font change on screen display. T04 T08 T12 T16 1 2 3 4 CS04 CS08 CS16 CD16 CD08 LS16 LD16 LL16 LL32 1 1 1 2 2 2 3 2 2 The models such as CD (240FPS/240FPS), LS(480FPS/120FPS), LL16(480FPS/480FPS), and LL32(960FPS/480FPS) support 2 TV-OUTs. LD16(480FPS/240FPS) support 3 TV-OUTs and the rest of the modules support 1. Setup Options : 1.
Show Camera Names and Status : By checking it, camera names and status will be displayed on camera pictures. Show Motion Detection Blocks : By checking it, green motion detection blocks will be displayed on camera pictures when recording schedule is set as “M” (Setup/Schedule). Show Object Detection Blocks : By checking it, blue object detection blocks willbe displayed on camera pictures. ● Text Inserter Text Inserter is a function that allows MagicRadar DVR system to integrate with POS machines.
Postion Setting: Position change on screen display. Main System Application(Control) Font Settings: Font change on screen display. Text Filter: Register important goods and useless text to display distinguishably and search POS data conveniently. Important goods items: Pre-registered items will be displayed in red characters. Useless text: It is not going to be displayed during transaction. About: Shows POS S/W version. 36 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
● Maintenance Log Hard Disk Usage is to select data storage method. If “Once” is selected, data will be stored up to the point where HDD reaches its maximum capacity. If “Recycle” is selected, data will be overwritten from the point HDD reaches its maximum capacity based on “First In First Out”. It is used to record and view maintenance history. ● I-Phone I-phone is “Two-Way Audio Communication”. Check the box, go to Control Screen, and click on the I-phone button for audio communication.
Cameras will be enabled by checking the boxes. Different resolutions and recording frame rates can be set up for different cameras. [Motion Detection] Select a function between Motion detection, Object detection and People Count. Motion detection is a function that DVR software detects every movements or motions by comparing a frame with the previous frame. Video Signal Type: Select either NTSC or PAL. Auto Channel Scan: It automatically identifies all the active video channels.
Main System Application(Control) Setting Multiple Motion Detection Zone: To set more than one motion detection zone. Possible up to 16 motion detection zones with all different colors. Zone All: Displays all areas together that have been set for the zones. How to set: Click on “Add Zone” and select another zone desired to be detected. Note: If the number of zones exceeds 16, below error message will be appeared. Setting All: Selects whole area Delete Zone: Deletes zones one by one. 42 Tibetsystem Co.
Main System Application(Control) [Object Detection] It is a function that marks all the changes occurred from the original scene. MagicRadar will detect new & missing objects after a certain period of time (detecting interval). Object Detection Blocks Detecting Interval: An interval that DVR tries repeatedly to detect any object change in the zone set. For example, if the object is appeared and remained only 5 seconds, it will not be detected in case 1 min. detecting interval is set as above.
Main System Application(Control) [People Count] It is a function that counts people coming in and out of a certain place. How to Set up: 1. Set Count Interval. 2. Set zone by dragging mouse. 3. If a directional counting is needed, select one. Motion Detection: Counting by Motion Detection. Input Device: Counting by Input Device such as sensor. Reset Everyday: Tick box to reset everyday automatically. Interval(Sec.): Counting interval from the time object is detected.
Main System Application(Control) [Mosaic] It is a function that veils restricted areas to keep regular users uninformed. How to Set up: 1. Tick the “Use Mosaic” box. 2. Click on “Mosaic Zone Settings”. 3. Set “Mosaic Zone”. 4. Go to the “Control Screen” and find veiled areas. Note: 1. While using Mosaic, “Save” or “Print” can not be performed. 2. To see unveiled area, logging in as “Admin” or “Admin Mode” is required. 48 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
[PTZ Camera Setup] It is a function that retains data only for the period set. For example, if 10 days is set, MagicRadar will delete all previous data before 10 days regardless of the capacity remaining in HDD. When using a PTZ camera, check the box and select a model name. MagicRadar DVR system supports nearly 40 different protocols. Camera ID: Leave it as it is if only one PTZ camera is used. Otherwise, give each camera a different number.
Main System Application(Control) [PTZ Control by Drag and Drop] How to Set Up: 1. Simply ticks “Using PTZ Mouse Control” as above and select a proper PTZ model name. 2. On a PTZ screen, drag mouse to the desired position to see. [ Virtual Keypad for Speed Dome Camera] How to Set Up: 1. Select “SpeedDome Camera/TBT INC.” protocol to run Virtual Keypad. 2. Set proper Camera ID, Port, Bit per Second, and etc. 3. Click right mouse button on PTZ Screen and select “ PTZ Keypad”. 52 Tibetsystem Co.,Ltd.
Steps to Set up Presets: 1. Move camera to a desired position using the PTZ Control on Control screen. 2. Click the right mouse. 3. Name the preset. 4. Repeat the above for setting up as many as 256 presets. 5. Click the right mouse to run preset and click the “Auto” button to stop it. Main System Application(Control) [Preset & Touring] Either click the right mouse on camera picture or click on the Preset (Touring) button for Preset (Touring) setup and use.
Main System Application(Control) [Touring] “Touring” is a function that enables a group of selected presets to work repeatedly. Dwell: The length of time that camera will pause before moving to the next preset. Speed: Moving speed for selected preset. Steps to Set up a Tour: 1. Click the right mouse. 2. Name the tour. 3. Click on “Add”. 4. Select a preset. 5. Click “OK”. 6. Repeat the above to have more than 1 preset in the tour. 7. Click the right mouse to run the tour. 56 Tibetsystem Co.,Ltd.
It is a function that integrates Access Control into DVR system. For Access control DVR, please refer to Appendix 4 “Access control DVR”. Main System Application(Control) [Access Control] How to Set up: 1. Click on “Advanced” 2. Click on “Access Control Integration” 3. Type in “IP Address” and Port Number of access control connected PC. Note: For more information about Access Control Integration, refer to the appendix 4, please. Advanced PTZ setup can be done by one right mouse click.
● Input Device MagicRadar DVR system can be equipped with as many as 8 output devices. Simply check the boxes for use. In addition, outputs can be manually activated from Control screen (Manual Alarm). MagicRadar DVR system can be equipped with as many as 16 input devices. Simply check the boxes for use. Main System Application(Control) ● Output Device Double-click on “Output” for individual output setup. Name: Output device name. Length of Activation: The length of output activation (1-60 sec.).
● Alert MagicRadar DVR system is equipped with as many as 8 audio channels. Simply connect cameras to audio channels for use, and audio recording will be completed as chosen. (e.g.) The above selections indicate that Audio2 will record Camera3, Audio3 will record Camera5, etc. MagicRadar DVR system is equipped with 1 alert device. Alert is the beep inside the system that sounds in the case of event. Check the box for use and select an alert mode.
“Event”consists of 3 different groups; “Input”, “Motion Detection” and “No Video Signal”. On this menu, devices can be set to respond to different events. ● Input Main System Application(Control) (3) Event Event Sound Settings: To differentiate alert sound by Events(Sensor, Motion, and No video Signal), select a Wave File for each. Length of Full Screen Display: The time length for full screen display in the case of input device activation.
● Motion Detection The same identical concepts and methods as “Input” are applied to the “Motion Detection”. Main System Application(Control) Link to Recording: One Input device can have as many as 16 recording cameras on activation. The below example shows that Camera1 will record in the case of Input1 activation. Link to Output: One Input device can have as many as 8 activating output devices on activation. The above example shows that Output1 will be activated in the case of Input1 activation.
Main System Application(Control) ● No Video Signal The same identical concepts and methods as “Input” are applied to “No Video Signal”. The same identical concepts and methods as “Input” are applied to “Audio Capture Error”. When “Audio Capture Error” is occurred, it is linking to Alert and Output. User can link the event to Reboot, Message on DVR. ● Watchdog The same identical concepts and methods as “Input” are applied to “Watchdog”.
“Schedule” is a place where the different activities of different devices are determined. ● Camera The same identical concepts and methods as “Input” are applied to “Disk Writing Failed”. When “Disk Writing Failed” is occurred, it is linking to Alert and Output. User can link the event to Reboot, Message on DVR. Main System Application(Control) (4) Schedule Each camera can have different recording options; scheduled recording by time & day and selective recording.
● Manual (Instant) Recording Main System Application(Control) The holiday recording schedule set at the bottom of the “Schedule” table will be applied to selected dates. It is a function that enables users to react on an emergency situation properly by making MagicRadar start recording immediately. Use Scheduled Backup: To set backup automatically. Please refer to above example. Automatic Start Time: At 1 a.m. it automatically starts back up. Time Period From: When “Apply Previous Date” is checked, 2 a.
Select detailed schedule for actrivating sensor and alarm individnally. (5) Network Main System Application(Control) ● Device ● DVR Server Supported Network: 1. TCP/IP - Connecting to DVR Server from Client using Lan or DSL 2. PSTN - Connecting to DVR Server from Client using PSTN or ISDN modem 3. Not In Use - Not allowed to connect to DVR Server remotely Port No.: The default port number is 9091.
Port No.: Fixed HTTP Port No. Web Login Required: If the box is checked, login is required when connecting DVR server using web browser. If the box is NOT checked, automatic login as “anonymous” will be done. Loading text webpages without picture images: If the box is cehcked, it takes less time to download initial page of web broeser. It downloads only text, not graphic user interface. Choose events to report to Central Station server and set reporting time period.
Main System Application(Control) Send camera(s) to send out image(s) when the event occurs. 78 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
“Dial Alarm” is a function that enables MagicRadar DVR system to call out on selected events. Check the box and click on “Properties” for setup. Main System Application(Control) ● Dial Alarm Modem card must be installed inside MagicRadar DVR system to make this function work. Type in phone (mobile) number to report. Click on “Reported Events” (same setup as Central Station) for more setup. 80 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
(6) User IP Address Setup Clicking "IP Address Setting" will open a window for Network Connections as below. Users can be added, deleted or modified with different authorized access and control levels. There are no limits in the number of users created. Main System Application(Control) ● Authorized Access: Checked functions will be allowed to access remotely. Accessible Channels: Checked channels will be allow to view remotely.
Chapter 3 Digital Video Surveillance System - MagicRadar View Log Application > Screen Features - Event Log
View Log Application(Status) (1) Event Log 1. Screen Features Recording Camera: It shows recording status. Sensor Detection: It shows sensor detection status. Event search is classified by motion detection, output, input and general. Event occurred time and ended time by camera are displayed simply on the table. Printing, saving of saved event list and managing the list are available in the ‘Event Search’ menu. Checking access network user and its time is available.
Using Event Log Retain: Event log can be saved into DVR automatically from 1 to 12 months and its default setting is 3 months. It is to avoid overloading of event log. Example: If it sets 3 months and it is 20th of August today. It deletes data before 20th of May. View Log Application(Status) ● Motion Detection Date: All dates with events will be marked in bold numbers. List: All events for a certain selected date will be shown. Delete All Logs: If clicked, all the previous records will be deleted.
● General Output Selection: Occurred time of event from output device is displayed on the table prominently with output device info. General: Occurred time of events from all connected devices are displayed on the table prominently with each device info. ● Input Selection Input Selection: Occurred time of event from input device is displayed on the table prominently with input device info. 90 View Log Application(Status) ● Output Selection Tibetsystem Co.,Ltd.
View Log Application(Status) (3) Status of the HDD Every 5 hour DVR checks the status of HDD and shows its condition with different colors. Green: okay Yellow: Faulty is going on. Red: Completely fault. 92 Tibetsystem Co.,Ltd. If HDD is completely fault, POPUP menu as above will be shown. It rests till the system shuts down, and it shuts down below message will be appeared. [ MagicRadar ] User’s Manual (5.2.0.
Chapter 4 Playback Application Digital Video Surveillance System - MagicRadar > Search Features 1 > Search Features 2 - Playback - Event/Object/Text/People Count Search - Monitoring & Searching - Bookmark & Go To - Save - Print - Backup
Clicking right mouse on Time bar for Browse... and select a folder containing backup data. (1) Playback For playback, simply select date, screen mode (1, 4, 9, 16, etc.), time by one click on the time bar and click the play button. What different colors mean on the time bar: 1. Search Features 1 Calendar: All dates with recorded data will be marked in bold numbers.
Playback Application(Search) (2) Event / Object / Text / People Count Search [Object Search] [Event Search] Click the Event / Object / Text / People Count / Access Control Search button and select “Event”. Object Search is only to search certain selected objects for a certain period of time. Scan: Set the time period for object search. Motion Detection Zone: Select “Set” and mark areas for object search by dragging mouse. “Clear” is used to erase certain areas inside motion detection zones.
[People/ POS Count Search] It is to search POS text data with image according to selected time period and item. It is to serch people/POS count statistics according to selected time period & camera. Through this function, the results of people count and POS transaction can be analyzed by the hour and cameras. Playback Application(Search) [Text Search] Select date, camera & time, and statistics will be shown as below.
Playback Application(Search) Statistics 1. Camera/Hour: Select camera and hour wish to search 2. Start/End: Select date wish to search 3. Camera All/Hour All: Click it to select all cameras and hour. 4. Total Transaction: Results after searching searching transaction count in total 5. Total Count: Results after searching people count in total 6. Search: Click it to start search 7. Close: Click it to close the menu. People Count Search 1.
It is a feature that enables user to view live video while searching recorded data. Playback Application(Search) (3) Monitoring & Searching How to read data and graph 1. Counted number of (T)ransaction/ Counted number of (P)eople count 2. Red Color: Rate of people count Green Color: Rate of Transaction The Pie Graph will show at a glance how many transactions have been performed, compared to the number of people counted. 104 Tibetsystem Co.,Ltd.
Playback Application(Search) (4) Bookmark & Go To (5) Save Bookmark (Favorites): Added data from “Object Search” are stored here. Watermark(Image) Using Watermark(Image): To attach a certain logo or special picture on AVI file. AVI: For saving motion pictures and audio BMP: For saving images. Watermarked images can be saved. JPEG: For saving regular still images. Quality is not as good as BMP but less HDD is used.
Playback Application(Search) [Save in AVI Format] Click “Start” to start saving and “Stop” to stop saving. Mute: Saving video only (no audio) High Speed: Saving in high speed Click time period settings and put the time period that you want to save. Click on “Browse” to find watermark image or logo. 108 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
Playback Application(Search) [Save in BMP Format] [Save in BMP Format] Click “Start” and select “BMP” as you save images. Saved images can be checked using “Watermark Proofer”. [Watermark Proofer] Execute Watermark Proofer and check if certain saved images are forged or not. [Save in JPEG Format] Click “Start” and select “JPEG” as you save images. [Save in JPEG with Time Period] Select time period and select channels to be saved in JPEG. 110 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
Click the “Print” button and follow the same printing procedure as you would normally print out documents. (7) Backup Playback Application(Search) (6) Print [DFS Back up] DFS: Save in DFS file format. Dialog: Show the directory of burning software (ex.Nero Burning) External CD Burning Program: User can run the other CD burning program such as Nero burning. After successfully back up the file, user can burn the data onto CD.
Playback Application(Search) Select Time period: Specify time period for backup. The minimum period for backup is 1 minute. If password is set, viewing backup data will be possible only when it is typed in. Backup Folder: Click the “Browse” button, select a drive to back up and enter a desired folder name. Play CD-Burning: Check to burn the backup data through an external Burning program. Log File: Shows “Backup Start Time”, “Directory”, “Status-fail or Success”. 114 Tibetsystem Co.,Ltd.
1. Select “EXE File”. 2. Specify time period, password, drive, etc. 3. Select ONE channel to back up. 4. Specify file size up to ONE GB. If it is larger than 1GB, multiple exe files will be created. 5. Tick the “Once Make EXE File” box to create only one file with the file size specified. 6. Double-click the exe file created to see data. Playback Application(Search) [EXE Back up] Any recorded data can be saved as “.exe” file. No viewer program is required to see saved data. Note : 1.
Playback Application(Search) [Run CD Burner ( For Non Windows XP Users)] 1. Install bundle CD and install InCD. 3.After installing INCD, run “InCDL.exe” which is the InCD Launch Program. 4. Insert a blank RW CD and then start formatting it (If it is a brand-new one, click “Format” instead of “Quick Format”). 118 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
Playback Application(Search) 5. Leave the MagicRadar Program and insert the blank RW CD which has been formatted. 6. Select “Backup” and click “Next” to start. 7. Select time period & password and click “Browse” to create a folder. 120 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
Playback Application(Search) [Run CD Burner ( For WindowsXP Users Only)] Windows XP users can back up data directly in a CD without exiting the MagicRadar Program. 1. Tick the “Save in CD data of backup” box and click “Next”. 122 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
Playback Application(Search) 2. Select Time Period : Specify time period and password. 3. Select CD-RW drive. 4. Create folder name if it should be used and click “Next”. 5. CD information will be shown as below. 124 Tibetsystem Co.,Ltd. 6. Select 1 channel to back up. 7. Identify the maximum file size indicated. An attempt to back up more than the size indicated will result in a failure. [ MagicRadar ] User’s Manual (5.2.0.
[Playback] 1. Click the “Start” button and run the “DVR’s Playback Program”. 2. Select a folder (subfolder) to see saved data. 126 Tibetsystem Co.,Ltd. Playback Application(Search) 8. After completing back up, find the files created in the CD. [ MagicRadar ] User’s Manual (5.2.0.
Chapter 5 Digital Video Surveillance System - MagicRadar Remote Monitoring System > Program Execution > Remote Save and Backup > Real Time Audio
Remote Monitoring System(Client) 1. Program Execution Double-click on the “MagicRadar DVR Client” icon on the desktop to execute Remote Monitoring System (Client). Click “Add” to reguster DVR server. There can be more than one DVR server registered. Select one from “Servers”, click on “Login” and type in password to log in. Edit: Login info. changes can be made here. Delete: Registered servers can be deleted with one click.
Remote Monitoring System(Client) 2. Remote Save and Backup 3. Real Time Audio Click the right mouse and select “Enable Audio” to hear real time audio. The instant AVI file save of real time video can be done remotely. Note: Changing “Setup” remotely can be done if remote user is “Admin” or “Admin Mode”. 1. Click the right mouse to start saving. 2. Click the right mouse to stop saving. Remote Backup can also be done. The same procedure is used as “DFS Backup”. 132 Tibetsystem Co.,Ltd.
Appendix I-phone > Installation Digital Video Surveillance System - MagicRadar > Execution > Audio Setup
Appendix 2 I-phone 2-1. Installation 2.2 Execution Any system used for “Two-way Communication” must have static IP and “iphone(1.0.1.0).exe” must be installed. For I-phone installation, double-click on “iphone(1.0.1.0).exe”. Click “Next” to start installation process and select “Automatic Installation”. Go to “Start”, “All Programs”, find “I-phone” and select it for execution. Find the I-phone icon at the right bottom and click it for the next step.
Appendix 2 I-phone 2.3 Audio Setup Go to “Control Panel”, “Sounds, Speech and Audio Devices” and “Sounds and Audio Devices”. Then, go to “Audio”, “Sound playback” and click “Volume”. Recording Control should be set up this way. 138 Tibetsystem Co.,Ltd. [ MagicRadar ] User’s Manual (5.2.0.
