EyeMax 9000 Series DVR Manual EyeMax 9000 Series nuall DVR R Man
Ta b le o f Con t e n t s 1 Software Installation 7 1. Automatic Installation - Definition - Installation Method Selection - Installing Drivers - DVR File System Installation - Completion & Retry 9 9 9 9 10 13 2. Manual Installation - Definition - Installation Method Selection - Software Selection 14 14 14 14 3. Remote Client Installation - Using Eyemax S/W - Using the Web Browser 15 15 16 4.Uninstallation 21 5.Program Execution 21 2 Main System Application 23 1. Startup Screen 24 2.
Eyemax 9000 Series DVR 1.
Chapter 1 Eyemax Software Installation 9000 Series DVR > Automatic Installation > Manual Installation > Remote Client Installation > Uninstallation > Program Execution
1. Automatic Installation (1) Definition It is a method to install all the relevant softwares automatically. Select “Automatic Installation” at all times unless only “Eyemax Client” is to be installed. Software Installation Steps: 1. Insert Eyemax S/W. 2. Double-click “Eyemax. English(5.1.0.0).exe”. (2) Installation Method Selection (3) Installing Drivers 8 [EyeMax] User’s Manual (5.1.0.
Software Installation (4) DVR File System Installation Selecting “Quick Initialization” will lead to the initialization of entire disk capacity added. Otherwise, put in desirable number to initialize. Note that the number can not exceed total capacity added. Initializing With Archiving the Data: This is to increase DFS storage by taking additional space from the current “Reserved Capacity”. So new value for “Reserved Capacity” can not exceed the current one.
Software Installation At least one of “available disk drive” must be added for data storage. Otherwise, the alert message will pop up. (5) Completion & Retry Retry the entire procedure if an error message is displayed. 12 [EyeMax] User’s Manual (5.1.0.
(1) Definition Software Installation 2. Manual Installation 3. Remote Client Installation (1) Using Eyemax S/W It is a method to install selected softwares manually. Select “Manual Installation” only in the case of “Eyemax Client” installation. Double click “Eyemax.english(5.1.0.0). exe”. (2) Installation Method Selection (3) Software Selection Select “Manual Installation”. Select “Eyemax DVR Client” only. Note: The rest of the procedures are the same as “Automatic installation”.
Software Installation (2) Using Web Browser 1. Type in the IP address of DVR server. 2. Log in first before downloading Remote Client Program. 16 [EyeMax] 1. Live View 2. Screen splits and channel selection 3. PTZ control : Only users with proper authority to control PTZ remotely. 4. Advanced: Controlling preset, tour and E-map only for authorized users. 5. Speed: PTZ speed control 6. To save live image to JPEG 7. To listen Audio of a selected channel applied only for authorized user remotely 8.
Software Installation 1, Searched Image 2. Selection for image search 3. Play back(Fast back, Back, Stop, Play, Fast Play) 4. Save: AVI, JPEG, BMP 5. Audio 6.To change Tab to CONTROL 7.Log out and go back to LOG IN page 18 [EyeMax] 1. Click the Install Remote Client button for downloading User’s Manual (5.1.0.
Software Installation 4. Uninstallation 2. Click “Next” to proceed. 5. Program Execution 3. Select “Manual Installation”. 4. Click “Next” to finish Installation process. Find the icons on the desktop to execute “Eyemax DVR” and “Eyemax DVR Client”. Or find “Eyemax DVR” under “All Programs”. 20 [EyeMax] User’s Manual (5.1.0.
Chapter 2 Eyemax Main System Application 9000 Series DVR > Startup Screen > Login > Exit / Logout > System Information > Control Screen > Setup (System/Device/Event/Schedule/Network/User)
Main System Application(Control) 4. System Information 1. Startup Screen Click on System Information to see DVR system information, such as OS version, CPU, RAM, HDD, IP address, DVR model and DVR software The above screen will appear as Eyemax DVR system starts. 5. Control Screen 2. Login Model Network Setup Adjust The default values for User and Password are “admin” and “no password”. Click “OK” to execute Eyemax DVR system.
Main System Application(Control) 6. Setup (1) System Camera Cameras will be enabled by checking the boxes. Different resolutions and recording frame rates can be set up for different cameras. DVR Information Video Signal Type: Select either NTSC or PAL. Auto Channel Scan: It automatically identifies all the active video channels. Make sure to always click and scan after S/W version change. Default: It sets “Event Recording Frame” and “Recording Frame” as default values.
Auto-switching Interval Auto-switching Interval is a function that allows green square around selected camera to move to the next one at the interval set. Period : Select a day that DVR system reboots automatically by the period. Reserved time : Time set to shut down or to reboot DVR system e.g.) Camera1 Disable : selected when System Power Management is not to be used Camera3 .
Main System Application(Control) Click on the E-map button positioned next to the I-phone button to open E-map. White Camera : Not on Recording, Yellow Camera: On Recording, White Input/White Output : Not Activated, Yellow Input/Yellow Output: Activated TV-OUT TV-OUT is a function that sends selected cameras to a call monitor (external analog monitor). Click on the “TV-OUT” button for setup. The above is a designed E-map sample. Drag mouse to position Camera/Input/Output and design E-map.
Main System Application(Control) On-screen Display The Number of TV-out Supported Font Settings: Font change on screen display. 9030 9060 9120 9240 9480 9424 9448 1 1 1 2 2 3 1(2) The models such as 9240 (240FPS/240FPS) and 9480 (480FPS/120FPS) support 2 TV-OUTs. 9424 (480FPS/240FPS) support 3 TV-OUTs and the rest of the models support 1. Setup Options : 1. Same as Server Screen Mode (For 9480(480FPS/120FPS) only) - TV-OUT Monitor displays what s on DVR server.
Show Camera Names and Status : By checking it, camera names and status will be displayed on camera pictures. Show Motion Detection Blocks : By checking it, green motion detection blocks will be displayed on camera pictures when recording schedule is set as “M” (Setup/Schedule). Show Object Detection Blocks : By checking it, blue object detection blocks willbe displayed on camera pictures. Text Inserter Text Inserter is a function that allows Eyemax DVR system to integrate with POS machines.
Postion Setting: Position change on screen display. Main System Application(Control) Font Settings: Font change on screen display. Text Filter: Register important goods and useless text to display distinguishably and search POS data conveniently. Important goods items: Pre-registered items will be displayed in red characters. Useless text: It is not going to be displayed during transaction. About: Shows POS S/W version. 36 [EyeMax] User’s Manual (5.1.0.
Maintenance Log Hard Disk Usage is to select data storage method. If “Once” is selected, data will be stored up to the point where HDD reaches its maximum capacity. If “Recycle” is selected, data will be overwritten from the point HDD reaches its maximum capacity based on “First In First Out”. It is used to record and view maintenance history. I-Phone I-phone is “Two-Way Audio Communication”. Check the box, go to Control Screen, and click on the I-phone button for audio communication.
Cameras will be enabled by checking the boxes. Different resolutions and recording frame rates can be set up for different cameras. [Motion Detection] Select a function between Motion detection, Object detection and People Count. Motion detection is a function that DVR software detects every movements or motions by comparing a frame with the previous frame. Video Signal Type: Select either NTSC or PAL. Auto Channel Scan: It automatically identifies all the active video channels.
Main System Application(Control) Use Details: set more than one motion detection zone. Possible up to 16 motion detection zones with all different colors. Zone All: Displays all areas together that have been set for the zones. How to set: Click on “Add Zone” and select another zone desired to be detected. Note: If the number of zones exceeds 16, below error message will be appeared. Setting All: Selects whole area Delete Zone: Deletes zones one by one. 42 [EyeMax] User’s Manual (5.1.0.
Main System Application(Control) [Object Detection] It is a function that marks all the changes occurred from the original scene. Eyemax will detect new & missing objects after a certain period of time (detecting interval). Detecting Interval: An interval that DVR tries repeatedly to detect any object change in the zone set. For example, if the object is appeared and remained only 5 seconds, it will not be detected in case 1 min. detecting interval is set as above.
Main System Application(Control) [People Counter] It is a function that counts people coming in and out of a certain place. How to Set up: 1. Set Count Interval. 2. Set zone by dragging mouse. 3. If a directional counting is needed, select one. Motion Detection: Counting by Motion Detection. Input Device: Counting by Input Device such as sensor. Reset Everyday: Tick box to reset everyday automatically. Interval(Sec.): Counting interval from the time object is detected.
Main System Application(Control) [Mosaic] It is a function that veils restricted areas to keep regular users uninformed. How to Set up: 1. Click on “Advanced”. 1. Tick the “Use Mosaic” box. 2. Click on “Mosaic Zone Settings”. 3. Set “Mosaic Zone”. 4. Go to the “Control Screen” and find veiled areas. Note: 1. While using Mosaic, “Save” or “Print” can not be performed. 2. To see unveiled area, logging in as “Admin” or “Admin Mode” is required. 48 [EyeMax] User’s Manual (5.1.0.
[PTZ Camera Setup] It is a function that retains data only for the period set. For example, if 10 days is set, Eyemax will delete all previous data before 10 days regardless of the capacity remaining in HDD. When using a PTZ camera, check the box and select a model name. Eyemax DVR system supports nearly 40 different protocols. Camera ID: Leave it as it is if only one PTZ camera is used. Otherwise, give each camera a different number.
Main System Application(Control) [PTZ Control by Drag and Drop] How to Set Up: 1. Simply ticks “Using PTZ Mouse Control” as above and select a proper PTZ model name. 2. On a PTZ screen, drag mouse to the desired position to see. [ Virtual Keypad for Speed Dome Camera] How to Set Up: 1. Select “SpeedDome Camera/TBT INC.” protocol to run Virtual Keypad. 2. Set proper Camera ID, Port, Bit per Second, and etc. 3. Click right mouse button on PTZ Screen and select “ PTZ Keypad”.
Steps to Set up Presets: 1. Move camera to a desired position using the PTZ Control on Control screen. 2. Click the right mouse. 3. Name the preset. 4. Repeat the above for setting up as many as 256 presets. 5. Click the right mouse to run preset and click the “Auto” button to stop it. Main System Application(Control) [Preset & Touring] Either click the right mouse on camera picture or click on the Preset (Touring) button for Preset (Touring) setup and use.
Main System Application(Control) [Touring] “Touring” is a function that enables a group of selected presets to work repeatedly. Dwell: The length of time that camera will pause before moving to the next preset. Speed: Moving speed for selected preset. Steps to Set up a Tour: 1. Click the right mouse. 2. Name the tour. 3. Click on “Add”. 4. Select a preset. 5. Click “OK”. 6. Repeat the above to have more than 1 preset in the tour. 7. Click the right mouse to run the tour. 56 [EyeMax] User’s Manual (5.
Main System Application(Control) [Access Control] It is a function that integrates Access Control into DVR system. For Access control DVR, please refer to Appendix 4 “Access control DVR”. How to Set up: 1. Click on “Advanced” 2. Click on “Access Control Integration” 3. Type in “IP Address” and Port Number of access control connected PC. Note: For more information about Access Control Integration, refer to the appendix 4, please. Advanced PTZ setup can be done by one right mouse click.
Input Device Eyemax DVR system can be equipped with as many as 8 output devices. Simply check the boxes for use. In addition, outputs can be manually activated from Control screen (Manual Alarm). Eyemax DVR system can be equipped with as many as 16 input devices. Simply check the boxes for use. Main System Application(Control) Output Device Double-click on “Output” for individual output setup. Name: Output device name. Length of Activation: The length of output activation (1-60 sec.).
Alert Eyemax DVR system is equipped with as many as 8 audio channels. Simply connect cameras to audio channels for use, and audio recording will be completed as chosen. (e.g.) The above selections indicate that Audio2 will record Camera3, Audio3 will record Camera5, etc. Eyemax DVR system is equipped with 1 alert device. Alert is the beep inside the system that sounds in the case of event. Check the box for use and select an alert mode.
“Event”consists of 3 different groups; “Input”, “Motion Detection” and “No Video Signal”. On this menu, devices can be set to respond to different events. Input Main System Application(Control) (3) Event Event Sound Settings: To differentiate alert sound by Events(Sensor, Motion, and No video Signal), select a Wave File for each. Length of Full Screen Display: The time length for full screen display in the case of input device activation.
Motion Detection The same identical concepts and methods as “Input” are applied to the “Motion Detection”. Main System Application(Control) Link to Recording: One Input device can have as many as 16 recording cameras on activation. The below example shows that Camera1 will record in the case of Input1 activation. Link to Output: One Input device can have as many as 8 activating output devices on activation. The above example shows that Output1 will be activated in the case of Input1 activation.
Main System Application(Control) No Video Signal The same identical concepts and methods as “Input” are applied to “No Video Signal”. The same identical concepts and methods as “Input” are applied to “Audio Capture Error”. When “Audio Capture Error” is occurred, it is linking to Alert and Output. User can link the event to Reboot, Message on DVR. Watchdog The same identical concepts and methods as “Input” are applied to “Watchdog”.
“Schedule” is a place where the different activities of different devices are determined. Camera The same identical concepts and methods as “Input” are applied to “Disk Writing Failed”. When “Disk Writing Failed” is occurred, it is linking to Alert and Output. User can link the event to Reboot, Message on DVR. Main System Application(Control) (4) Schedule Each camera can have different recording options; scheduled recording by time & day and selective recording.
Manual (Instant) Recording Main System Application(Control) The holiday recording schedule set at the bottom of the “Schedule” table will be applied to selected dates. It is a function that enables users to react on an emergency situation properly by making Eyemax start recording immediately. Use Scheduled Backup: To set backup automatically. Please refer to above example. Automatic Start Time: At 1 a.m. it automatically starts back up. Time Period From: When “Apply Previous Date” is checked, 2 a.m.
Select detailed schedule for actrivating sensor and alarm individnally. (5) Network Main System Application(Control) Device DVR Server Supported Network: 1. TCP/IP - Connecting to DVR Server from Client using Lan or DSL 2. PSTN - Connecting to DVR Server from Client using PSTN or ISDN modem 3. None - Not allowed to connect to DVR Server remotely Port No.: The default port number is 9091.
Port No.: Fixed HTTP Port No. Web Login Required: If the box is checked, login is required when connecting DVR server using web browser. If the box is NOT checked, automatic login as “anonymous” will be done. Choose events to report to Central Station server and set reporting time period. Central Station Main System Application(Control) Web Server E-mail “Central Station” is a function that enables Client with static IP to manage multi DVR sites. Check the box and click on “Properties” for setup.
Main System Application(Control) Send camera(s) to send out image(s) when the event occurs. 78 [EyeMax] User’s Manual (5.1.0.
“Dial Alarm” is a function that enables Eyemax DVR system to call out on selected events. Check the box and click on “Properties” for setup. Main System Application(Control) Dial Alarm Modem card must be installed inside Eyemax DVR system to make this function work. Type in phone (mobile) number to report. Click on “Reported Events” (same setup as Central Station) for more setup. 80 [EyeMax] User’s Manual (5.1.0.
Clicking "IP Address Setting" will open a window for Network Connections as below. Users can be added, deleted or modified with different authorized access and control levels. There are no limits in the number of users created. Main System Application(Control) (6) User IP Address Setup Authorized Access: Checked functions will be allowed to access remotely. Accessible Channels: Checked channels will be allow to view remotely.
Chapter 3 Eyemax View Log Application 9000 Series DVR > Screen Features - Event Log
View Log Application(Status) (1) Event Log 1. Screen Features Recording Camera: It shows recording status. Date: All dates with events will be marked in bold numbers. List: All events for a certain selected date will be shown. Delete All Logs: If clicked, all the previous records will be deleted. Delete This Log: If clicked, only the events for a certain selected date will be deleted. Refresh: If clicked, events will be updated. Print: Print the event log of a selected date.
Chapter 4 Eyemax 9000 Series DVR Playback Application > Search Features 1 > Search Features 2 - Playback - Event/Object/Text/PeopleCount/AccessControlSearch - Monitoring & Searching - Bookmark & Go To - Save - Print - Backup
Clicking right mouse on Time bar for Browse... and select a folder containing backup data. (1) Playback For playback, simply select date, screen mode (1, 4, 9, 16, etc.), time by one click on the time bar and click the play button. What different colors mean on the time bar: 1. Search Features 1 Calendar: All dates with recorded data will be marked in bold numbers.
Playback Application(Search) (2) Event / Object / Text / People Count Search [Object Search] [Event Search] Click the Event / Object / Text / People Count / Access Control Search button and select “Event”. Object Search is only to search certain selected objects for a certain period of time. Scan: Set the time period for object search. Motion Detection Zone: Select “Set” and mark areas for object search by dragging mouse. “Clear” is used to erase certain areas inside motion detection zones.
[People Count Search] It is to search POS text data with image according to selected time period and item. It is to search people count statistics search according to selected time period & camera. Through this function, the results of people count and POS transaction can be analyzed by the hour and cameras. Select date, camera & time, and statistics will be shown as below. Statistics can also be saved as text file. Playback Application(Search) [Text Search] People Count Search 1.
It is a feature that enables user to view live video while searching recorded data. Playback Application(Search) (3) Monitoring & Searching How to read data and graph 1. Counted number of (T)ransaction/ Counted number of (P)eople count 2. Red Color: Rate of people count Green Color: Rate of Transaction The Pie Graph will show at a glance how many transactions have been performed, compared to the number of people counted. 96 [EyeMax] Click the right mouse and select “Monitoring On” to view live video.
Playback Application(Search) (4) Bookmark & Go To (5) Save Bookmark (Favorites): Added data from “Object Search” are stored here. Watermark(Image) Using Watermark(Image): To attach a certain logo or special picture on AVI file. AVI: For saving motion pictures and audio BMP: For saving images. Watermarked images can be saved. JPEG: For saving regular still images. Quality is not as good as BMP but less HDD is used.
Playback Application(Search) [Save in AVI Format] Click “Start” to start saving and “Stop” to stop saving. Mute: Saving video only (no audio) High Speed: Saving in high speed Click time period settings and put the time period that you want to save. Click on “Browse” to find watermark image or logo. 100 [EyeMax] User’s Manual (5.1.0.
Playback Application(Search) [Save in BMP Format] [Save in BMP Format] Click “Start” and select “BMP” as you save images. Saved images can be checked using “Watermark Proofer”. [Watermark Proofer] Execute Watermark Proofer and check if certain saved images are forged or not. [Save in JPEG Format] Click “Start” and select “JPEG” as you save images. [Save in JPEG with Time Period] Select time period and select channels to be saved in JPEG. 102 [EyeMax] User’s Manual (5.1.0.
Click the “Print” button and follow the same printing procedure as you would normally print out documents. (7) Backup Playback Application(Search) (6) Print [DFS Back up] DFS: Save in DFS file format. Dialog: Show the directory of burning software (ex.Nero Burning) External CD Burning Program: User can run the other CD burning program such as Nero burning. After successfully back up the file, user can burn the data onto CD.
Playback Application(Search) Select Time period: Specify time period for backup. The minimum period for backup is 1 minute. If password is set, viewing backup data will be possible only when it is typed in. Backup Folder: Click the “Browse” button, select a drive to back up and enter a desired folder name. Play CD-Burning: Check to burn the backup data through an external Burning program. Log File: Shows “Backup Start Time”, “Directory”, “Status-fail or Success”. 106 [EyeMax] User’s Manual (5.1.0.
1. Select “EXE File”. 2. Specify time period, password, drive, etc. 3. Select ONE channel to back up. 4. Specify file size up to ONE GB. If it is larger than 1GB, multiple exe files will be created. 5. Tick the “Once Make EXE File” box to create only one file with the file size specified. 6. Double-click the exe file created to see data. Playback Application(Search) [EXE Back up] Any recorded data can be saved as “.exe” file. No viewer program is required to see saved data. Note : 1.
Playback Application(Search) [Run CD Burner ( For Non Windows XP Users)] 1. Install bundle CD and install InCD. 3.After installing INCD, run “InCDL.exe” which is the InCD Launch Program. 4. Insert a blank RW CD and then start formatting it (If it is a brand-new one, click “Format” instead of “Quick Format”). 110 [EyeMax] User’s Manual (5.1.0.
Playback Application(Search) 5. Leave the Eyemax Program and insert the blank RW CD which has been formatted. 6. Select “Backup” and click “Next” to start. 7. Select time period & password and click “Browse” to create a folder. 112 [EyeMax] User’s Manual (5.1.0.
Playback Application(Search) [Run CD Burner ( For WindowsXP Users Only)] Windows XP users can back up data directly in a CD without exiting the Eyemax Program. 1. Tick the “Save in CD data of backup” box and click “Next”. 114 [EyeMax] User’s Manual (5.1.0.
Playback Application(Search) 2. Select Time Period : Specify time period and password. 3. Select CD-RW drive. 4. Create folder name if it should be used and click “Next”. 5. CD information will be shown as below. 116 [EyeMax] 6. Select 1 channel to back up. 7. Identify the maximum file size indicated. An attempt to back up more than the size indicated will result in a failure. User’s Manual (5.1.0.
[Playback] 1. Click the “Start” button and run the “DVR’s Playback Program”. 2. Select a folder (subfolder) to see saved data. 118 [EyeMax] Playback Application(Search) 8. After completing back up, find the files created in the CD. User’s Manual (5.1.0.
Chapter 5 Eyemax 9000 Series DVR Remote Monitoring System > Program Execution > Remote Save and Backup > Real Time Audio
Remote Monitoring System(Client) 1. Program Execution Double-click on the “EyeMax DVR Client” icon on the desktop to execute Remote Monitoring System (Client). Click “Add” to register DVR servers, There can be more than one DVR server registered. Select one from “Servers”, click on “Login” and type in password to log in. Edit: Login info. changes can be made here. Delete: Registered servers can be deleted with one click. Full Screen Display on Event: If checked, full screen will be displayed on events.
The instant AVI file save of real time video can be done remotely. 1. Click the right mouse to start saving. Remote Monitoring System(Client) 2. Remote Save and Backup 3. Real Time Audio Click the right mouse and select “Enable Audio” to hear real time audio. Note: Changing “Setup” remotely can be done if remote user is “Admin” or “Admin Mode”. 2. Click the right mouse to stop saving. Remote Backup can also be done. The same procedure is used as “DFS Backup”. 124 [EyeMax] User’s Manual (5.1.0.
Appendix 1 POS DVR Eyemax 9000 Series DVR > Hardware Installation
Appendix 1 POS DVR 1-1. Hardware Installation (1) Parts g. DVR a. RS232 Serial Cables (Cross & Direct) b. RS232 Serial Cable c. RS232 Serial Cable h. POS Printer d. RS232 Serial Converter (9 pins into 25 pins) + e. Gender Changer i. Point of Sales (POS) f. a + d + e 128 [EyeMax] User’s Manual (5.1.0.
Appendix 1 POS DVR (2) Installation “b” goes into the COM Port 1 of “g”. “a” goes into the serial port of “h”. “c” goes into the serial port of “i”. 130 [EyeMax] User’s Manual (5.1.0.
Appendix 2 I-phone Eyemax 9000 Series DVR > Installation > Execution > Audio Setup
Appendix 2 I-phone 2-1. Installation 2.2 Execution Any system used for “Two-way Communication” must have static IP and “iphone(1.0.1.0).exe” must be installed. For I-phone installation, double-click on “iphone(1.0.1.0).exe”. Click “Next” to start installation process and select “Automatic Installation”. Go to “Start”, “All Programs”, find “I-phone” and select it for execution. Find the I-phone icon at the right bottom and click it for the next step.
Appendix 2 I-phone 2.3 Audio Setup Go to “Control Panel”, “Sounds, Speech and Audio Devices” and “Sounds and Audio Devices”. Then, go to “Audio”, “Sound playback” and click “Volume”. Recording Control should be set up this way. 136 [EyeMax] [EyeMax] User’s Manual (5.1.0.
Appendix 3 Eyemax 9000 Series DVR MDVR > Installation > Overview > Execution
(1) Start Start: Click “Next” to start installation process. (2) Selection of Installation Method Select “Automatic Installation”. 140 [EyeMax] (3) On Installing Appendix 3 MDVR 1. Installation Start: Click “Next” to start installation process. (4) Finish Click “Finish” to complete installation. User’s Manual (5.1.0.
Exit Appendix 3 MDVR 2.Overview Multi-site Management Search Site Name Screen Mode PTZ Camera Control Registration Steps: 1. Click “Add group” to make group. One group can have up to 64 sites (cameras). Setup Live Viewing E-map Event Log in & Log out Properties 3. Execution (1) Properties 2. After making all groups, select a group to register sites. Click on the “Add site” button. 3. Type in all the required info. as below. Make sure to put in the same user and password used on DVR. 4.
Appendix 3 MDVR (3) Setup (2) Log in & Log out Click on the “Setup” button to use different opions. Click on the “Log in & out” button to log in. 144 [EyeMax] User’s Manual (5.1.0.
Appendix 3 MDVR By tickinging the box, camera name, status, and POS text will be displayed on camera picture. By ticking the box, MDVR user and password will be asked in the event of the execution of MDVR. Click on the right mouse and select “Camera Lock” to be able to position DVRs at desired locations. E-map Click on the “E-Map” button to configure E-Map. To create an E-Map image, click on the right mouse and select “Open E-Map”. Only BMP file can be in use.
Appendix 3 MDVR (4) Search After configuration, selected E-Map image and all DVR sites at selected locations can be viewed. To visit DVR site using E-Map, simply double-click on camera-shaped icon. Any DVR (camera-shaped icon) blinking in red and blue has event occurred. Search Steps: 1. Select date from the calendar. 2. Select time from the time bar. Save Backup Event Save Image can be saved either in BMP File or in JPEG File “Event” displays all the events coming in from registered DVRs.
Appendix 3 MDVR Backup Back up recorded data using various backup devices. If password is set, viewing backup data will be possible only when it is typed in. 150 [EyeMax] User’s Manual (5.1.0.
Appendix 4 Eyemax 9000 Series DVR Access Control DVR > Configurtion Diagram > Installing FP Server > Installing “Access Control Server” > DVR Setup > Access Control Search > Access Control Client
2. Installing FP Server TCP / IP Start: Click “Next” to start installation process. Do not install “Hamster installation” Install “access Control Cleint” Appendix 4 Aeecss Control DVR 1. Configuration Diagram TCP / IP TCP / IP Network Server (FP Server) For more information for “Terminal Setup”, please refer to Access Control user’s guide and FPS Server Program manual” which will be provided separately. 3. Installing “Access Control Server” 1. Install “FPServer_Setup_V2.09” 2.
4. DVR setup (1) Set up. Appendix 4 Aeecss Control DVR (1) On Installing (2) Finish: Click “Finish” to complete installation. Click “Access control” button on camera set up page. 156 [EyeMax] User’s Manual (5.1.0.
Appendix 4 Aeecss Control DVR 5. Access Control Search 1. Click the “Access Control” Search button 1. Type Access control’s IP address. 2. Click “OK” to finish set-up. 2. Set time period and click “Search” 3. Double-click the searched data to see captured image of the site. 158 [EyeMax] User’s Manual (5.1.0.
(3) “Access Control Client” setup (1) Installing Start: Click “Next” to start installation process. Appendix 4 Aeecss Control DVR 6. Access Control Client 1. Double-Click Access Control Client software. 2. Click “set up” button. (2) Execution 3. Fill in Server(DVR)’s information. 4. Type IP Address and User name / PW of DVR server. 160 [EyeMax] User’s Manual (5.1.0.
Appendix 4 Aeecss Control DVR 5. Click “OK” to log-on to the DVR server. 6. Set time period that you want to search. 7. Click “OK”. 162 [EyeMax] User’s Manual (5.1.0.
