System information

32
Video Signal Type:
Select either NTSC or PAL.
Auto Channel Scan:
It automatically identifies all the
active video channels. Make
sure to always click and scan
after S/W version change.
Default:
It sets “Event Recording Frame”
and “Recording Frame” as
default values.
Modify Frame rate by itself:
Frame will be adjusted
automatically by select
r
eso
l
ut
i
o
n
Cameras will be enabled by
checkin
g
the boxes.
z
Camera
Different resolutions and recording
frame rates can be set up for
different cameras.
[Camera]
Select recording picture quality.
CBR can be set with X948
(H.264 hardware compression)
only.
Double-click on “Camera”for
more individual Camera setup.
Pre-alarm (max. 10 sec.):
Length of time to be recorded
before event
Post-alarm (max. 10 min.):
Length of time to be recorded
after event