Rev 1.0 0 Rev 1.
1 TABLE OF CONTENTS CHAPTER 1 Hardware Specification......................................................... 4 1. Production Specification ................................................................................ 4 CHAPTER 2 Software Installation ............................................................ 5 1. Automatic Installation ................................................................................... 6 (1) Definition ..............................................................
2 z On-screen Display .......................................................................................... 25 z Text Inserter.................................................................................................. 27 z Hard Disk Usage ............................................................................................ 30 z I-phone (Two-Way Audio Communication) .......................................................... 30 (2) Device ....................................................
3 CHAPTER 5 Playback Application (Search) ............................................ 77 1. Search Features 1 .......................................................................................... 77 2. Search Features 2 .......................................................................................... 78 (1) Playback ........................................................................................................ 78 (2) Event/Object/Text/People Count Search.............................
4 CHAPTER 1 HARDWARE Specification 1. Product Specification Models 9030 9060 9120 9240 9448 9632 X948 Displaying Speed (NTSC) 30fps 60fps 120fps 240fps 480fps 960fps 480fps Recording Speed (NTSC) 30fps 60fps 120fps 240fps 480fps 480fps 480fps Video Inputs 4 16 16 16 16 32 16 Audio Inputs 1 2 4 8 16 16 16 Sensor Inputs 4 4 16 16 16 16 16 Alarm Outputs 2 2 8 8 8 8 8 Video Resolution Compression Type D1 / Half D1 / CIF MPEG4 / H.
5 CHAPTER 2 Software Installation Steps: 1. Insert EyeMax S/W. 2. Double-click “EyeMax.English(5.5.4.0)”. [ EyeMax Series ] User’s Manual (5.5.4.
6 1. Automatic Installation (1) Definition It is a method to install all the relevant software automatically. Select “Automatic Installation” at all times unless only “Client Software” is to be installed.
7 (4) DVR File System Installation Definition: Occupying disk capacity to record data Steps: 1. Select drives from “Available Disk Drive Capacity” 2. Click “Add”. 3. Click “Initialization”. Caution: 1. “C Drive” cannot be added to DFS disk, it is used for O/S and DVR software. 2. HDD has to be initialized to record data [ EyeMax Series ] User’s Manual (5.5.4.
8 Selecting “Quick Initialization” will lead to the initialization of entire disk capacity added. Otherwise, put in desirable number to initialize. Note that the number can not exceed total capacity added. Initializing With Archiving the Data: This is to increase DFS storage by taking additional space from the current “Reserved Capacity”. So new value for “Reserved Capacity” can not exceed the current one. Minimum 300MB is recommended for DVR performance.
9 At least one of “available disk drive” must be added for data storage. Otherwise, the alert message will pop up. [ EyeMax Series ] User’s Manual (5.5.4.
10 (5) Completion & Retry Retry the entire procedure if an error message is displayed.
11 2. Manual Installation (1) Definition It is a method to install selected software manually. Select “Manual Installation” only in the case of “Client Software” installation. (2) Installation Method Selection (3) Software Selection Note: The rest of the procedures are the same as “Automatic Installation”. [ EyeMax Series ] User’s Manual (5.5.4.
12 3. Remote Client Installation (1) Using EyeMax S/W Double-click “Eyemax.English(5.5.4.0).exe”. Select “Manual Installation”. Select “Eyemax DVR Client” only.
13 (2) Using Web Browser 1. Click the “Install Remote Client” button for downloading. 2. Save Client software and run “clientinstall.exe” file to continue. [ EyeMax Series ] User’s Manual (5.5.4.
14 3. Click “Next” to proceed. 4. Select “Manual Installation”. 5. Click “Next” to finish installation process.
15 4. Uninstallation Execute “Uninstall EyeMax DVR” to uninstall software. 5. Program Execution Find the icons on the desktop to execute “EyeMax DVR” and “EyeMax DVR Client”. Or find “EyeMax DVR” under “All Programs”. [ EyeMax Series ] User’s Manual (5.5.4.
16 CHAPTER 3 Main System Application 1. Startup Screen The above screen will appear as EyeMax DVR system starts. 2. Login The default values for User and Password are “admin” and “no password”. Click “OK” to execute DVR system. To give “admin” a password and to create new users, certain configurations are required (Setup/User). Only “admin” and users with appropriate authorization have access to the Setup menu. Note: Virtual keypad is available on the right top of GUI if needed 3.
Main System Application(Control) 17 4. System Information Click Power button and then “System Information” button Click on System Information to see DVR system information, such as OS version, CPU, RAM, HDD, IP address, DVR model and DVR software. 5.
18 z Channel Relocation Camera location can be changed by drag & drop by mouse. How to configure channel by drag & drop: 1. Select channel: click mouse button. 2. Hold on mouse button and drag over to target channel 3. Release mouse button over the target channel. 4. You will see the location of channel has changed on (Refer to above picture) (2) Right click menu on screen On control tab, click right mouse button to open shortcut menu. TV-OUT: Enable selected channel to TV out 2 manually.
Main System Application(Control) 6. Setup (1) System z DVR information Click DVR Information button to open window Create a system name and put in administrator info. This information will be displayed on outgoing e-mails. [ EyeMax Series ] User’s Manual (5.5.4.
20 z System Time Setup By clicking “System Time Settings”, user is able to set Date and Time in DVR software. Change date and time: To change current time manually. Change time zone: To change Current time zone in DVR system. z System Power Management Period: Select a day that DVR system reboots automatically by the period. Reserved time: Time set to shut down or to reboot computer. Disable: selected when System Power Management is not to be used.
Main System Application(Control) Details: First select either “Shutdown” or “Reboot” to enable Period. For example in above picture, 7 days after the basic date, system will shutdown automatically. “Details” shows the set date and it will be the starting point. z Auto-switching Interval Auto-switching Interval is a function that allows green square around selected camera to move to the next one at the interval set. e.g.) Camera 1→10 sec.→Camera 2→10 sec.→Camera 3…. [ EyeMax Series ] User’s Manual (5.5.
22 z E-map Click on the “E-map” button to design E-map. Click on “Open Map Image” to select an E-map image. The above is a designed E-map sample. Drag mouse to position Camera/Input/Output and design E-map.
Main System Application(Control) Click on the E-map button to open E-map. White Camera: Not on Recording, Yellow Camera: On Recording, White Input/White Output: Not Activated, Yellow Input/Yellow Output: Activated z TV-OUT TV-OUT is a function that sends selected cameras to a call monitor (external analog monitor). Click on the “TV-OUT” button for setup. [ EyeMax Series ] User’s Manual (5.5.4.
24 The Number of TV-out Supported 9030 9060 9120 9240 9448 9632 X948 1 1 1 1 1(2) 2 2 The models such as 9240 (240FPS/240FPS), 9632(480FPS/480FPS), 9832(960FPS/480FPS) and X948(480FPS/480FPS) support 2 TV-OUTs. And the rest of the models support 1. Setup Options: 1. Same as Server Screen Mode (9448, 9632 and X948 only) - TV-OUT Monitor displays what’s on DVR server. Manual Channel Selection - Channels are selected manually.
Main System Application(Control) z On-screen Display Font Settings: Font change on screen display. Postion Setting: Position change on screen display. [ EyeMax Series ] User’s Manual (5.5.4.
26 On a control screen, you may click right mouse button to control OSD as below. Camera Information: By checking it, camera names and status will be displayed on camera pictures. Motion Detection: By checking it, green motion detection blocks will be displayed on camera pictures when recording schedule is set as “M” (Setup/Schedule). Note: One right mouse click can be a very useful tool. Manual TV-out and OSD setup can be done. Additionally, instant recording can start by one click.
Main System Application(Control) z Text Inserter Text Inserter is a function that allows MagicRadar DVR system to integrate with POS machines. Simply select POS driver like selecting PTZ driver to enable POS text inserter program and transactions that occur will be displayed on selected camera pictures. Transaction recording and text search are possible as well. For more detailed installation and information, refer to Appendix 1. How to Set 1. Tick the “Using Text Inserter” 2.
28 Text Filter: Register important goods and useless text to display distinguishably and search POS data conveniently. Important goods items: Pre-registered items will be displayed in red characters. Useless text: It is not going to be displayed during transaction. About: Shows POS S/W version.
Main System Application(Control) Font Settings: Font change on screen display. Advanced: Position change on screen display. Overlay Position: Specify position of POS overlay. Text Overlaying Duration: Specify duration of POS data shows. [ EyeMax Series ] User’s Manual (5.5.4.
30 z Hard Disk Usage Hard Disk Usage is to select data storage method. If “Once” is selected, data will be stored up to the point where HDD reaches its maximum capacity. If “Recycle” is selected, data will be overwritten from the point HDD reaches its maximum capacity based on “First In First Out”. z I-Phone (Two-Way Audio Communication) I-Phone is “Two-Way Audio Communication”. Check the box, go to Control Screen, and click on the I-Phone button for audio communication.
Main System Application(Control) (2) Device Device sub-screen is divided into 5 different setup categories; Camera, Output, Input, Audio Alert and Hybrid Device. (Hybrid Device category will be added by install hybrid driver. To integrate Hybrid device on 5.5.4.0 refer to page 52. “Hybrid Device”) All devices in each category can be set up on one same page. [ EyeMax Series ] User’s Manual (5.5.4.
32 z Camera Cameras will be enabled by checking the boxes. Different resolutions and recording frame rates can be set up for different cameras. Video Signal Type: Select either NTSC or PAL. Auto Channel Scan: It automatically identifies all the active video channels. Make sure to always click and scan after S/W version change. Default: It sets “Event Recording Frame” and “Recording Frame” as default values.
Main System Application(Control) [Motion Detection] Select a function between Motion detection, Object detection and People Count. Motion detection is a function that DVR software detects every movement or motion by comparing a frame with its previous frame. Zone Setting: 1. Drag mouse on desired place to set motion detection zones. 2. To clear the zones set, click on “Clear all” or drag mouse after click on “clear”. [ EyeMax Series ] User’s Manual (5.5.4.
34 Setting Multiple Motion Detection Zone: To set more than one motion detection zone. Possible up to 16 motion detection zones with all different colors. How to set: Click on “Add Zone” and select another zone desired to be detected. Note: If the number of zones exceeds 16, above error message will be appeared.
Main System Application(Control) Zone All: Displays all areas together that have been set for the zones. Setting All: Selects whole area Delete Zone: Deletes zones one by one. [ EyeMax Series ] User’s Manual (5.5.4.
36 [Object Detection] It is a function that marks all the changes occurred from the original scene. DVR will detect new & missing objects after a certain period of time (detecting interval). Detecting Interval: An interval that DVR tries repeatedly to detect any object change in the zone set. For example, if the object is appeared and remained only 5 seconds, it will not be detected in case 1 min. detecting interval is set as above. Viewing Original Frame: Checking an original image set.
Main System Application(Control) Click the right mouse and select “Clear Object Detection Blocks” to remove all the blocks. Object Detection icon How to Set up: 1. Tick the “Object Detection” box and click on “Zone Settings”. 2. Drag the mouse to select object detection zone (same as “Motion Detection”). 3. Click on the “Set Frame” button to select original (default) image. 4. Go to “Detection Interval” and determine when to mark new object after its pause. 5. Go to “Setup/Schedule” and select “M” 6.
38 [People Count] It is a function that counts people coming in and out of a certain place.
Main System Application(Control) How to Set up: 1. Set Count Interval. 2. Set zone by dragging mouse. 3. If a directional counting is needed, select one. Motion Detection: Counting by Motion Detection. Input Device: Counting by Input Device such as sensor. Reset Everyday: Tick box to reset everyday automatically. Interval (Sec.): Counting interval from the time object is detected. Check Movement from 1st Zone to 2nd: Counting based on the direction a place to another.
40 [Mosaic] It is a function that veils restricted areas to keep regular users uninformed. Hide Hide Camera: If “Hide Camera” is selected, every user except admin cannot see relevant channel. How to Set up Mosaic Zone: 1. Tick the “Use Mosaic” box then “Mosaic Zone Settings button” will be enabled. 2. Click on “Mosaic Zone Settings”. 3. Set “Mosaic Zone”. 4. Go to the “Control Screen” and find veiled areas. Note: 1. While using Mosaic, “Save” or “Print” cannot be performed. 2.
Main System Application(Control) [Data Retain] It is a function that retains data only for the period set. For example, if 10 days is set, DVR will delete all previous data before 10 days regardless of the capacity remaining in HDD. How to Set up: • Click on “Advanced” • Tick the “Use Data Retain”. • Click on “Detail”. to select a day period to retain Note: Warning message to inform as above will be appeared. To continue, click on “Yes” [ EyeMax Series ] User’s Manual (5.5.4.
42 [PTZ Camera Setup] When using a PTZ camera, check the box and select a model name. MagicRadar DVR system supports nearly 40 different protocols. Use homepreset: Tick the box and set homepreset set (Select preset as home preset). Camera ID: Leave it as it is if only one PTZ camera is used. Otherwise, give each camera a different number. Restore as Previous: Set time period to move camera back to initial position after a certain period of time. Select the port used for PTZ camera.
Main System Application(Control) [PTZ Control by Drag and Drop] How to Set Up: 1. Simply ticks “Using PTZ Mouse Control” as above and select a proper PTZ model name. 2. On a PTZ screen, drag mouse to the desired position to see. [Virtual Keypad for Speed Dome Camera] How to Set Up: 1. Select “SpeedDome Camera/TBT INC.” protocol to run Virtual Keypad. 2. Set proper Camera ID, Port, Bit per Second, and etc. 3. Click right mouse button on PTZ Screen and select “ PTZ Keypad”.
44 [Preset] “Preset” is a function that enables a camera to move from one position to another automatically. Steps to Set up Presets: 1. Move camera to a desired position using the PTZ Control on Control screen. 2. Click the right mouse. 3. Name the preset. 4. Repeat the above for setting up as many as 256 presets. 5. Click the right mouse to run preset and click the “Auto” button to stop it.
Main System Application(Control) [Touring] “Touring” is a function that enables a group of selected presets to work repeatedly. Steps to Set up a Tour: 1. Click the right mouse. 2. Name the tour. 3. Click on “Add”. 4. Select a preset. 5. Click “OK”. 6. Repeat the above to have more than 1 preset in the tour. 7. Click the right mouse to run the tour. Dwell: The length of time that camera will pause before moving to the next preset. [ EyeMax Series ] User’s Manual (5.5.4.
46 [Advanced PTZ Settings] Open right mouse click menu and click “Advanced PTZ Settings” Make sure that the PTZ camera to set up supports advanced PTZ control functions first. [TV Out OSD] Camera name of TV out can be changed by TV-OUT OSD menu. Input camera name and press OK button to continue.
Main System Application(Control) z Output Device DVR system can be equipped with as many as 8 output devices. Simply check the boxes for use. In addition, outputs can be manually activated from Control screen (Manual Alarm). Double-click on “Output” for individual output setup. Name: Output device name. Length of Activation: The length of output activation (1-60 sec.). Length of Standby: The length of output deactivation until reactivation (0-60 sec.).
48 z Input Device DVR system can be equipped with as many as 16 input devices. Simply check the boxes for use. Each and every input can be tuned independently.
Main System Application(Control) z Audio DVR system is equipped with as many as 16 audio channels. Simply connect cameras to audio channels for use, and audio recording will be completed as chosen. (e.g.) The above selections indicate that Audio2 will record Camera3, Audio3 will record Camera5, etc. Input Gain (1-15): It is audio level control similar to volume control. Sound Quality: It is to specify sound quality (15 / 31kbps [ EyeMax Series ] User’s Manual (5.5.4.
50 z Alert DVR system is equipped with 1 alert device. Alert is the beep inside the system that sounds in the case of event. Check the box for use and select an alert mode. Length of Activation: The length of alert activation (1-60 sec.).
Main System Application(Control) Event Sound Settings: To differentiate alert sound by Events(Sensor, Motion, and No video Signal), select a Wave File for each. [ EyeMax Series ] User’s Manual (5.5.4.
52 z Hybrid Device It is a function that integrates Hybrid devices through network connection. (IP Camera, Video Server and Standalone DVR series can be installed as Hybrid device) To use hybrid device, you need to install hybrid driver individually. How to install Hybrid device driver. 1. Close DVR software and exit to Windows. 2. Install hybrid driver: it is provided as a patch file. 3. After installation, restart DVR then Hybrid device driver will be registered to Magic Radar software automatically.
Main System Application(Control) (3) Event “Event” consists of 3 different groups; “Input”, “Motion Detection” and “No Video Signal”. On this menu, devices can be set to respond to different events. z Input Length of Full Screen Display: The time length for full screen display in the case of input device activation. Full Screen Display Channels: Full Screen Display: Selected camera channel will pop up if the linked input device is triggered.
54 Link to Recording: One Input device can have as many as 16 recording cameras on activation. The below example shows that Camera1 will record in the case of Input1 activation. Link to Output: One Input device can have as many as 8 activating output devices on activation. The above example shows that Output1 will be activated in the case of Input1 activation. Link to Alert: Input device can also be linked to alert.
Main System Application(Control) z Motion Detection The same identical concepts and methods as “Input” are applied to “Motion Detection”. [ EyeMax Series ] User’s Manual (5.5.4.
56 z No Video Signal The same identical concepts and methods as “Input” are applied to “No Video Signal”. z Watchdog The same identical concepts and methods as “Input” are applied to “Watchdog”. When “Video Capture Error” is occurred, it is linking to Alert and Output. User can link the event to Reboot, Message on DVR.
Main System Application(Control) The same identical concepts and methods as “Input” are applied to “Audio Capture Error”. When “Audio Capture Error” is occurred, it is linking to Alert and Output. User can link the event to Reboot, Message on DVR. The same identical concepts and methods as “Input” are applied to “Recording Error”. When “Recording Error” is occurred, it is linking to Alert and Output. User can link the event to Reboot, Message on DVR. [ EyeMax Series ] User’s Manual (5.5.4.
58 The same identical concepts and methods as “Input” are applied to “Disk Writing Failed” When “Disk Writing Failed” is occurred, it is linking to Alert and Output. User can link the event to Reboot, Message on DVR.
Main System Application(Control) (4) Schedule “Schedule” is a place where the different activities of different devices are determined. Each camera can have different recording options; scheduled recording by time & day and selective recording. R: Recording at all times E: Recording on event N: Stop recording H: Recording at all times and higher frame recording on event [ EyeMax Series ] User’s Manual (5.5.4.
60 Use Scheduled Backup: To set backup automatically. Please refer to next to example. Automatic Start Time: At 1 a.m. it automatically starts back up. Time Period From: When “Apply Previous Date” is checked, 2 a.m. means yesterday. If not, it is coming 2 a. m. To: Same concept as “From”. Channel: Cameras wish to backup. Select All: Select all cameras Password: Give password to play back back up data. Retype Password: Retype password to double confirm. Target Directory: Selects directory to backup.
Main System Application(Control) z Manual (Instant) Recording It is a function that enables users to react on an emergency situation properly by making DVR start recording immediately. . 1. The purple icon indicates that it is on “Manual Recording”. 2. Only ‘Admin’ can use “Manual recording”. Start “Manual Recording” by selecting “Recording On”. Stop “Manual Recording” by selecting “Recording Off”. [ EyeMax Series ] User’s Manual (5.5.4.
62 z Device Select detailed schedule for activating sensor and alarm individually.
Main System Application(Control) z DVR Server Supported Network: 1. TCP/IP - Connecting to DVR Server from Client using Lan or DSL 2. PSTN - Connecting to DVR Server from Client using PSTN or ISDN modem 3. Not In Use - Not allowed to connect to DVR Server remotely Port No.: The default port number is 9091. Timeout: The time length of trials to connect to DVR Server from Client Maximum Number of Users: The maximum number of users that can be logged in remotely.
64 z Web Server Port No.: Fixed HTTP Port No. Web Login Required: If the box is checked, login is required when connecting to DVR server using web browser. If the box is NOT checked, automatic login as “anonymous” will be done. Loading text webpages without picture images: If the box is checked, it takes less time to download initial page of web browser. It downloads only text, not graphic user interface.
Main System Application(Control) Choose events to report to Central Station server and set reporting time period. z E-mail E-mail is a function that enables DVR system to send out e-mails when selected events occur. Check the box and click on “Properties” for setup. Make sure to put in the right IP address of SMTP server. Then, click on “Reported Events” for more setup. The “Reported Events” menu is the same as Central Station. Note: Some e-mail server may require authentication for ID and PW.
66 Click “Advanced setting” to select cameras to attach image. Send camera(s) to send out image(s) when the event occurs.
Main System Application(Control) [ EyeMax Series ] User’s Manual (5.5.4.
68
Main System Application(Control) z Smartphones Rate Adjust smartphone transmit frame rate by set “Smartphones Rate” (1 frame ~ 10 frames per second.) z IP Address Setup Clicking “IP Address Setting” will open a window for Network Connections as below. Click right mouse and select Properties for IP setup for DVR’s network functions. [ EyeMax Series ] User’s Manual (5.5.4.
70 (6) User Users can be added, deleted or modified with different authorized access and control levels. There are no limits in the number of users created. Authorized Access: If it checked, functions will be allowed to access remotely. Accessible Channels: If it checked, channels will be allowed to view remotely. Control Level: The lowest number will be allowed to have the first priority to set up, control, etc remotely.
View Log Application (Status) CHAPTER 4 View Log Application(Status) 1. Screen Features Event Log Recording Camera: It shows recording status. Sensor Detect: It shows sensor detection status. Motion Detect: It shows motion detection status. Alarm: It shows alarm activation status. HDD Capacity: It shows HDD capacity used for recording. Event Log: It shows events occurred. [ EyeMax Series ] User’s Manual (5.5.4.
72 (1) Event Log Event search is classified by motion detection, output, input and general. Event occurred time and ended time by camera are displayed simply on the table. Printing, saving of saved event list and managing the list are available in the ‘Event Search’ menu. Checking access network user and its time is available. It is also possible to check HDD health.
View Log Application(Status) z Output Selection Output Selection: Occurred time of event from output device is displayed on the table prominently with output device info. z Input Selection Input Selection: Occurred time of event from input device is displayed on the table prominently with input device info. [ EyeMax Series ] User’s Manual (5.5.4.
74 z General General: Occurred time of events from all connected devices is displayed on the table prominently with each device info. (2) Network Client Log Network Client Log: Remote login records will be also kept on DVR server. Checking accessed network user, connected time and IP address are available.
View Log Application(Status) (3) Status of the HDD Every 5 hour DVR checks the status of HDD and shows its condition with different colors. Green: okay Yellow: Faulty is going on. Red: Completely fault. [ EyeMax Series ] User’s Manual (5.5.4.
76 If HDD is completely fault, POPUP menu as above will be shown. It rests till the system shuts down, and it shuts down below message will be appeared.
Playback Application(Search) CHAPTER 5 Playback Application (Search) 5.1 Search Features 1 1. Search Features 1 Calendar: All dates with recorded data will be marked in bold numbers. Sharpness: Buttons to adjust sharpness of image Zoom: Buttons to zoom in/out Brightness: buttons to adjust brightness Contrast: buttons to adjust contrast Default: Default for Zoom/Brightness/Contrast [ EyeMax Series ] User’s Manual (5.5.4.
78 2. Search Features 2 Clicking right mouse on Time bar for Browse… and select a folder containing backup data (1) Playback For playback, simply select date, screen mode (1, 4, 7, 9, 13, 16, etc.), time by one click on the time bar and click the play button. What different colors mean on the time bar: 1. Blue: Recorded data by sensor & motion detection 2. Purple: Recorded data by 24-hour-recording 3. White: No recorded data in all cameras 4. Gray: No recorded data for some cameras 5.
Playback Application(Search) (2) Event / Object / Text / People Count / Access Control Search [Event Search] Click the Event / Object / Text / People/POS Count Search button and select “Event”. Select channels for Event Search. Select one event from the event list and click “OK”, and the selected event will be displayed. Click “Refresh” to update the list. [ EyeMax Series ] User’s Manual (5.5.4.
80 [Object Search] Object Search is only to search certain selected objects for a certain period of time. Scan: Set the time period for object search Motion Detection Zone: Select “Set” and mark areas for object search by dragging mouse. “Clear” is used to erase certain areas inside motion detection zones. Sensitivity: Set motion detection sensitivity level. Clear All: Click on it to clear all the motion detection zones set.
Playback Application(Search) [Text Search] It is to search POS text data with image according to selected time period and item. Put in an item (Reference), select time period and click on “Search”, and a list with transactions will be displayed. - Searched words will be retained in the combo ox in down-list format so the data can be easily shown in next search. [ EyeMax Series ] User’s Manual (5.5.4.
82 [People / POS Count Search] It is to search people/POS count statistics according to selected time period & camera. Through this function, the results of people count and POS transaction can be analyzed by the hour and cameras. Select date, camera & time, and statistics will be shown as below. Statistics are distinguished as People Counting, POS Counting, and POS/People Counting. Statistics can also be saved as text file.
Playback Application(Search) People Count Search 1. People Counting: It shows counted people number in certain zones by Hour and Cameras on the table. 2. POS Counting: Counting It shows received POS data number in DVR by Hour and Cameras on the table. 3. POS/People Counting: It shows both counted People and received POS data number on the table. 4. Delete/Delete All: To erase data in statistics [ EyeMax Series ] User’s Manual (5.5.4.
84 Statistics 1. Camera/Hour: Select camera and hour wish to search 2. Start/End: Select date wish to search 3. Camera All/Hour All: Click it to select all cameras and hour. 4. Total Transaction: Results after searching transaction count in total 5. Total Count: Results after searching people count in total 6. Search: Click it to start search 7. Close: Click it to close the menu. Save 1. Select: Select menu wish to save. 2. Time Period: Select date wish to save.
Playback Application(Search) How to read data and graph 1. Counted number of (T)ransaction/ Counted number of (P)eople count 2. Red Color: Rate of people count Green Color: Rate of Transaction The Pie Graph will show at a glance how many transactions have been performed, compared to the number of people counted. [ EyeMax Series ] User’s Manual (5.5.4.
86 (3) Monitoring & Searching It is a feature that enables user to view live video while searching recorded data. Click the right mouse and select “Monitoring On” to view live video. Click the right mouse again and select “Monitoring Off” to go back to “Search Mode”.
Playback Application(Search) (4) Bookmark & Go To Click Bookmart Icon to open Bookmark window. Bookmark (Favorites): Added data from “Object Search” are stored here. Right click on the time table and select “Go To” menu to go to desired time to search. Go To: Select desired time to search and click “OK”. [ EyeMax Series ] User’s Manual (5.5.4.
88 (5) Save : Click Save icon to save data as AVI / BMP / JPEG format. Watermark(Image) Using Watermark (Image): To attach a certain logo or special picture on AVI file. AVI: For saving motion pictures and audio BMP: For saving images. Watermarked images can be saved. JPEG: For saving regular still images. Quality is not as good as BMP but less HDD is used. Save in JPEG with Time Period: For scheduled save in JPEG • Watermark Setting Select each for desirable watermark setting.
Playback Application(Search) [Save in AVI Format] Click on “Browse” to find watermark image or logo. Click “Start” to start saving and “Stop” to stop saving. Mute: Saving video only (no audio) High Speed: Saving in high speed Click time period settings and put the time period that you want to save. [Save in BMP Format] [Save in BMP Format] Click “Start” and select “BMP” as you save images. Saved images can be checked using “Watermark Proofer”. [ EyeMax Series ] User’s Manual (5.5.4.
90 [Watermark Proofer] Execute “Watermark Proofer” and check if certain saved images are forged or not. Click “Load” to browse file to check.
Playback Application(Search) [Save in JPEG Format] → Click “Start” and select “JPEG” as you save images. [Save in JPEG with Time Period] → Select time period and select channels to be saved in JPEG. [ EyeMax Series ] User’s Manual (5.5.4.
92 (6) Backup The recorded data can be copied from the hard disk to external storage devices, such as CD-R, DVD. Back up recorded data using various backup devices. z DFS Backup DFS: Save in DFS file format. Click “Next” to continue backup process.
Playback Application(Search) Select Time Period : Specify time period for backup. The minimum period for backup is 1 minute. If password is set, viewing backup data will be possible only when it is typed in. Backup Folder: Click the “Browse” button, select a drive to back up and enter a desired folder name. Select camera channels to backup. [ EyeMax Series ] User’s Manual (5.5.4.
94 Confirm the Backup information and click “Next” button to continue.
Playback Application(Search) z EXE Backup Any recorded data can be saved as “.exe” file. No viewer program is required to see saved data. Note: 1. file size limited up to 1 GB. 2. 1 channel backup only. 1. Select “EXE File”. 2. Specify time period, password, drive, etc. [ EyeMax Series ] User’s Manual (5.5.4.
96 3. Select ONE channel to back up. 4. Specify file size up to 1GB. If it is larger than 1GB, multiple exe files will be created. 5. Confirm the Backup information and click “Next” button to continue.
Playback Application(Search) 6. Double-click the exe file created to see data. [ EyeMax Series ] User’s Manual (5.5.4.
98 z EXE Backup with CD Recording You can back up data directly in a CD without exiting the DVR Program. 1. Tick the “Save in CD data of backup” box and click “Next”. 2. Select Time Period : Specify time period and password. 3. Select CD/DVD drive. 4. Create folder name if it should be used and click “Next”.
Playback Application(Search) 5. CD information will be shown as below. 6. Select 1 channel to backup. 7. Identify the maximum file size indicated. An attempt to back up more than the size indicated will result in a failure. [ EyeMax Series ] User’s Manual (5.5.4.
100 8. After completing backup, find the files created in the CD.
Playback Application(Search) [Playback] 1. Click the “Start” button and run the “EyeMax DVR Playback”. 2. Select a folder (subfolder) to see saved data. [ EyeMax Series ] User’s Manual (5.5.4.
102 CHAPTER 6 Remote Monitoring System (Client) 1. Remote Client Software (1) Software Execution Double-click on the “EyeMax DVR Client” icon on the desktop to execute Remote Monitoring System (Client). Click “Add” to register DVR servers. Note: Make sure to put the same Port No. as DVR server.
Remote Monitoring System(Client) There can be more than one DVR server registered. Select one from “Servers”, click on “Login” and type in password to log in. Edit: Login info. changes can be made here. Delete: Registered servers can be deleted with one click. Full Screen Display on Event: If checked, full screen will be displayed on events. Video display as RGB: if checked, video display will be shown as RGB type. This function improves client display compatibility. [ EyeMax Series ] User’s Manual (5.5.
104 (2) Remote Save and Backup 1 1. 2. 3. Click “Save” button to save image as AVI, BMP and JPEG remotely. Click “Print” button to print image of selected channel. Click “Backup” button to remote backup The same procedure is used as “DFS / EXE Backup”.
Remote Monitoring System(Client) (3) Real Time Audio Click the right mouse and select “Enable Audio” to hear real time audio. Note: Changing “Setup” remotely can be done if remote user is “Admin” or “Admin Mode”. [ EyeMax Series ] User’s Manual (5.5.4.
106 2. Web Viewer (1) Software Execution 1 2 1. On the Internet explorer, type in the IP address of DVR server. - Install ActiveX control to continue. 2. Input User ID and password and then click login button to continue.
Remote Monitoring System(Client) (2) Live Display 3 1 4 5 7 6 8 9 10 11 2 1, Live View 2. Screen splits and channel selection 3. Control Zoom, Iris, Focus 4. Advanced: Controlling preset, tour and E-map only for authorized users. 5. PTZ control : Only users with proper authority to control PTZ remotely. 6. Speed: PTZ speed control 7. To save live image to JPEG 8. To hear audio of a selected channel applied only for authorized user remotely 9. Mode change between Live and Search 10.
108 (3) Playback 1 2 3 4 5 6 7 1, Searched Image 2. Date and time selection from recording data 3. Play back(Fast Forward, Backward play, Stop, Play, Fast Forward) 4. Save: AVI, JPEG, BMP 5. Audio 6. To change Tab to CONTROL 7.
Remote Monitoring System(Client) 3. Smartphone Access (1) Real Time Monitoring If you can use Wi-Fi environments, you can view the real-time monitoring video from DVR with smartphone (iPhone, Blackberry, Symbian and Android) ① Run web browser at smartphone, and enter DVR IP address. ② Enter ID and password, and click “login” button the real-time monitoring screen will be shown. ① ② ③ Real-time monitoring screen 1. Camera selection (CH1~16) 2. Video quality selection (Norma, High) 3.
110 Appendix Two-way Audio Communication 1. Installation Any system used for “Two-way Audio Communication” must have static IP and “iphone(1.0.1.0).exe” must be installed. For I-phone installation, double-click on “iphone(1.0.1.0).exe”. Click “Next” to start installation process and select “Automatic Installation”. Click “Finish” to complete the process.
Appendix I-phone 2. Execution Go to “Start”, “All Programs”, find “I-phone” and select it for execution. Find the I-phone icon at the right bottom and click it for the next step. Select “Call” for Two-Way Communication”, type in IP address and click “Connect”. Property: The default port number is 8015 and the default timeout value is 5 seconds. Leave them as they are unless other values must be used. [ EyeMax Series ] User’s Manual (5.5.4.
112 3.
Appendix I-phone Go to “Control Panel”, “Sounds, Speech and Audio Devices” and “Sounds and Audio Devices”. Then go to “Audio”, “Sound playback and click “Volume”. Recording Control should be set up this way. [ EyeMax Series ] User’s Manual (5.5.4.
