User guide

Page 8
eyeheight
Unit 34 Park House Watford Business Park Greenhill Crescent Watford Herts GB WD18 8PH
Reg. No. 2855535 Telephone: [phone] Fax: [phone] email: [e-mail]
CHP-100 SDI-TC-GPI Card
Jumper Links on the Timecode and GPI I/O card
Jumper Function
J2 Set to the Right, SDI Jitter Filtering selection
LK1 Set to Top, Polarity selection for GPI Relay Output#1
LK2 Set to Top, Polarity selection for GPI Relay Output#2
LK3 Set to Top, Polarity selection for GPI Relay Output#3
LK4 Set to Top, Polarity selection for GPI Relay Output#4
Diagram of a GPI Output (GPI1Æ4)
Rear 25W D-Type connection (AUX)
Pin# Function
1. General Purpose Output #1a (GPO1a). Isolated Relay
closure. AUDIO ALARM
2. General Purpose Output #1b (GPO1b). Isolated Relay
closure.
3. General Purpose Output #2a (GPO2a). Isolated Relay
closure AUDIO ALARM ACCEPT
4. General Purpose Output #2b (GPO2b). Isolated Relay
closure
5. General Purpose Output #3a (GPO3a). Isolated Relay
closure
6. General Purpose Output #3b (GPO3b). Isolated Relay
closure
7. General Purpose Output #4a (GPO4a). Isolated Relay
closure.
8. General Purpose Output #4b (GPO4b). Isolated Relay
Pin 1,3,5,7
Pin 2,4,6,8
Jumpers LK1Æ4, set the polarit
y
of the rela
y