User guide

With the Block Edit Configuration dialog box, you define the Range that is to be

modified. The available options for the Range are:

• Select All

Choose this option to select the entire pattern for editing.

• Range

Choose this option to select the range of bits specified by the bit positions

entered in the From and To fields.

• Fill From Cursor to End

Choose this option to select the bits from the cursor location to pattern end.

• Fill From Start to Cursor

Choose this option to select the bits from pattern start to the cursor.

The line, at the bottom, displays to which part of pattern the current range applies.

The Block Edit Configuration dialog contains the following tabs:

N O T E

All the 5 tabs are visible in Symbol and OOB symbol mode. In Bin/Hex mode, the

Recode and 8b/10B tab are not available. In PAM4, the 8b/10b tab is not available.

Fill

This tab allows filling the given range in the pattern with the specified value.

The available options for the Fill are:

• Fill with Zeros

3 Setting up Patterns

86 Agilent J-BERT N4903B High-Performance Serial BERT