User guide

Select All/Unselect All
Use the Select All button to select all tests in the Self Test Options dialog box.
After clicking the button, it becomes the Unselect All button. Clicking the button
again will then unselect all tests and display the Select All button again.
Run Test
After selecting at least one test, use this button to start the test. If you selected
tests, that need a longer time to complete, a message box opens. Confirm your
selection by clicking OK. A second message box is informing you while the test is
still running and closes when finished.
Message Buttons
After the self test has finished, the results (Success or Failed) are displayed next
to each test. If a test has failed, you can use the Message button to open the BIOS
Messages window with detailed error messages explaining the failure reason.
Customizing the Instrument 10
Agilent J-BERT N4903B High-Performance Serial BERT 565