User guide

N O T E
Ensure your instrument state files have the extension, *.btz. If you do not specify
an extension or use a different extension, the instrument may not recognize the file
as an instrument state file.
N O T E
The default pathname for user defined instrument states is C:\<instrument model>
\Settings
The number of instrument states you can save is limited only by the available space
on the internal hard disk or floppy disk. Each instrument state uses approximately
6 kB of disk space.
T I P
Remember to always make a backup copy of your files. If your original files are
damaged or lost, you can restore the files from the backup copy.
Recalling Instrument States
Recalling the instrument state restores all the setup parameters for the instrument
hardware and software.
To recall the setup, do the following:
• In the File menu, click Open and then Open Instrument State.... This opens a
dialog box which allows you to select the setup file you want to recall.
N O T E
Loading the instrument state might take some time; please wait untill the instrument
state restore process is completed.
T I P
Remember always to make a backup copy your setup files. If your original files are
damaged or lost, you can restore the files from your backup copy.
N O T E
The default pathname for user defined instrument states is C:\<instrument model>
\Settings
Saving and Recalling Measurement Logs
Measurement Logs are saved as CSV (comma-separated values) files. Follow the
steps below to view results in a measurement log file.
1
Copy the measurement log file from the Serial BERT to your PC. By default, log
files are saved in the folder
C:\<instrument model>\log .
Customizing the Instrument 10
Agilent J-BERT N4903B High-Performance Serial BERT 559