User guide

Configuring Printer Properties
You can change the properties of a selected printer:
1
On the File menu, click Print Setup
2
Click Configure Printer....
This opens the Printers dialog box
3
In the File menu in the Printers dialog box, select from the following options:
–
Server Properties
Click this option to change such items as printer margins, spooler warnings
and alarms, and port configurations.
–
Properties
Click this option to change such items as pre-determined access times,
security items, and LAN protocols.
–
Document Defaults
Click this option to change such items as pages per sheet, print quality,
paper select, and portrait vs. landscape layouts.
4
Select Close in the File menu of the Printers dialog box.
The new settings will are applied and the dialog box closes.
N O T E
The printer properties and capabilities will vary depending on the printer you have
selected.
Printing Problems
You should check the following when your printer fails to print:
1
Check if the printer is turned on and the printer cable is securely attached to
both the printer and the instrument's printer connector.
2
Check if the printer driver for your printer is installed.
3
Check if the printer port is configured correctly.
For more information on printer problems, see the printer's operation manual.
Customizing the Instrument 10
Agilent J-BERT N4903B High-Performance Serial BERT 557