User guide

2
The instrument web server responds with the instrument’s “Welcome Page”,
as shown in the screen below.
3
Click on the left-side link to control/monitor the instrument.
4
The browser returns the instrument display and control applet in the main
display frame which contains the instrument display and the instrument-centric
controls provided in the applet.
How to Install the Web Server
The following steps explain how to download, and install the Web Server.
N O T E
The current J-BERT instrument can be upgraded to the Web Server enabled
software.
Follow the steps below to install the web server on the instrument:
1
Find "webserver.zip" at the same location as the N4903 software, and
download it. To download it you can right click on the link and select 'save
target as'.
2
Unzip the folder, because the installation can only be started from an unzipped
folder. Install the Web Server software. Follow the instructions prompted by
the installation process.
3
Launch N4903 software. Click on Utility menu item. The following submenu
will appear.
10 Customizing the Instrument
552 Agilent J-BERT N4903B High-Performance Serial BERT