User guide

entering the required information. You can remove keyboard and mouse when you
are done.
Checking the Serial BERT Software Revision
The Serial BERT software supports the N4876A on from revision 6.7 or later.
1
Switch on the Serial BERT.
2
In the Help menu, click About.
3
If the software revision is below 6.7, you need to update the software (see
“Updating the Software” on page 528).
Checking the Agilent IO Libraries Revision
New Serial BERT instruments are delivered with Agilent IO Libraries Suite Revision
15.5 or later installed.
1
In the Utility menu, click Minimize GUI to access the Windows operating
system.
2
Click the Agilent IO Control icon in the Windows task bar to open the IO Control
menu.
You see the menu item Agilent Connection Expert in the Windows task bar.
3
Click the About item to check the details.
Customizing the Instrument 10
Agilent J-BERT N4903B High-Performance Serial BERT 545