User guide

Licenses Dialog
The Licenses dialog informs you about the options that require a license.
The HOST ID / MAC Addr shown in the window is the MAC Address of your Serial
BERT. You will be asked for this address when you request a license file for an
option from Agilent.
N O T E
The MAC Address is used for generating the license key code. That means, the key
stored in the license file refers to just one instrument. If you wish to enable a licensed
feature on a different instrument, you need another license file.
N O T E
License handling is only available if both NIC (Network Interface Card/Adapter) are
enabled.
Install License
The Install License dialog is used for installing a license.
It indicates the feature that has been selected before opening the window and
allows you to browse for the associated license file.
The suffix of a license file is .lic .
If the license file has not been copied to the Serial BERT and is not accessible via
LAN, click the Enter button.
Enter License Key
This dialog allows you to enter the license key manually.
That means, you need to read (and probably print) the license file with a text editor
and type the key code.
Installing Hardware Options
Installing Hardware Options - Procedures
The Serial BERT has a slot for installing optional hardware.
10 Customizing the Instrument
536 Agilent J-BERT N4903B High-Performance Serial BERT