User guide

For more details refer to “Using an External Monitor ” on page 533 and “Using
the On-Screen Keyboard” on page 532.
N O T E
If the touchscreen is disabled, the external keyboard and mouse are also disabled.
See “Turning the Touchscreen Off/On” on page 531 on how to enable/disable
the touchscreen.
N O T E
If caps lock is pressed on the keyboard, this will also affect the frontpanel keys, i.e.
M(ega) and m(illi) will be exchanged!
Enabling the LAN Connectors
You can enable the LAN connection on your Serial BERT. This will allow you to
connect to network printers and remote servers with access to shared folders and
files.
The Serial BERT has two RJ-45 LAN connectors on the rear panel. They support
10 Base-T and 100 Base-T Ethernet networks using TCP/IP and other Microsoft
supported networking protocols. The Serial BERT uses Microsoft® Windows XP
Professional or Microsoft® Windows XP Professional for Embedded Systems.
For detailed instructions on how to enable the LAN connectors, please refer to the
Microsoft® Windows XP Professional manual..
C A U T I O N
Because your network settings are unique to your IT infrastructure, Agilent
Technologies will not be able to assist you with connecting your instrument to your
network. Please contact your network administrator or IT department for
assistance. For more information, refer to the MS Windows resource kit (available
from Microsoft) that is appropriate for your computer system.
C A U T I O N
Do not connect the Serial BERT to a network that is configured to automatically
install software on network devices. Installing or overwriting files on the Serial
BERT computer system may impact the operation of the instrument. Please contact
your network administrator or IT department to find out whether you have this type
of network.
10 Customizing the Instrument
530 Agilent J-BERT N4903B High-Performance Serial BERT