User guide

The Config window contains the following elements:
The Refresh button allows you to reload the external instruments list, in case, if
you are not able to see them in the instrument list. However, if the Config window
still do not display any externally connected instruments, restart the J-BERT
N4903B software and firmware.
The instrument list contains the following columns:
The Identify button (containing instrument's name) allows you to enable and
disable the identification LED on the external instrument(s). This is simply required
to help you to connect the right things at the right connector.
N O T E
For few instruments such as N4916A and M8061A, a text showing the instrument's
name will be shown instead of LED button.
The connection type defines the connection. For example, if N4916B is connected
to the Data Out, it will show DATA_OUT.
The Enable Function allows you to select and accordingly enable/disable the
selected functions provided by the externally connected instrument. The N4916A
2 Setting up External Instrument(s)
52 Agilent J-BERT N4903B High-Performance Serial BERT
Refresh
Instrument List
Identify
Connection
Enable Function