User guide

3
Connect the Data Output of the Serial BERT to the Data Input of the error
detector.
4
Ensure that the error detector follows the generated pattern.
– Press the Auto Align button.
– From the Analysis panel select the Eye Diagram page.
– Press the Start button.
After some seconds, you should see an eye diagram like the following:
This is the eye of a non-distorted pattern.
Problems with the N4916B
Problems with the N4916B - Concepts
When you have opened the External Instrument(s) - Config window and have
selected N4916B from the external instruments, select De-emphasis under Enable
Function column in the list, the N4916B Connection window appears.
9 Solving Problems
500 Agilent J-BERT N4903B High-Performance Serial BERT