User guide

How to Enable/Disable N4916B De-Emphasis Function
To enable/disable the de-emphasis function:
1
From the Config window, select the De-Emphasis function check box. It opens
the Deemphasis Signal Converter Connection dialog.
The following image shows the an example of N4916B.
2
Click Enable button. It enables the de-emphasis signal converter that is
connected between Data Out of Serial BERT and the DUT.
Once the de-emphasis function is enabled you can see the de-emphasis
parameters in the PG-Data Output screen. For more information, refer to the
section “Controlling the N4916B De-Emphasis Signal Converter” on page
133.
3
To disable the de-emphasis function, clear the De-Emphasis function check
box present on the Config window. It will disable the de-emphasis function and
the respective parameters from the PG-Data Output screen also disappears.
2 Setting up External Instrument(s)
46 Agilent J-BERT N4903B High-Performance Serial BERT