User guide

Jitter Tolerance Characterization - Procedures
To access the Jitter Tolerance Characterization measurement, press the
corresponding menu item from the Jitter submenu.
To set up a Jitter Tolerance Characterization test, press the Properties button.
This opens the Jitter Tolerance Properties dialog.
Setting the Frequency Range
Choose Auto or Manual mode.
In Auto mode, the jitter frequencies are automatically calculated:
1
Enter the Start Frequency.
2
Enter the Stop Frequency.
Start and stop frequency define the measurement's frequency range.
8 Jitter Tolerance Tests
438 Agilent J-BERT N4903B High-Performance Serial BERT