User guide

This is the low frequency jitter amplitude as rms value
This is the high frequency jitter amplitude as rms value
The Spectrally Distributed Random Jitter is equipped with a 100MHz Low Pass
filter to limit the spectral range, which can be enabled by pressing the
corresponding button.
External Jitter Source Parameters
When you enable the External Jitter the Jitter Setup function reserves the
remaining free capacity of the 220ps delay line for the signal applied to the Delay
Ctrl Input.
The parameter window informs you about
• Amplitude (max)
• Voltage (max)
• Slope
Jitter Tolerance Tests 8
Agilent J-BERT N4903B High-Performance Serial BERT 429
Amplitude LF (rms)
Amplitude HF (rms)
Filter