User guide

How to Change the Default Settings of an Eye Diagram?
To achieve desired results, you can change the measurement parameters:
1
Click the Properties button to open the Properties dialog box.
2
Use the different tabs in this dialog box to make the required settings:
– Parameters tab
The Parameter settings used for the measurement can be changed only
when the measurement is not running, and if the settings are changed, then
you will have to re-run the measurement. (Refer to “Parameters” on page
332 for the detailed options).
– View tab
6 Advanced Analysis
322 Agilent J-BERT N4903B High-Performance Serial BERT