User guide

How to Export Measurements
To export the measurement data into a .txt file for later use in external spreadsheet
applications:
1
After your measurement has finished and the results are displayed, select
Export Data from the Analysis menu.
2
In the Export dialog box, select the path and file name for the .txt file.
Alternatively, you can activate the Clipboard checkbox to copy the data to the
clipboard. In this case you can then paste it into any other application.
3
Press the Format Options button to open the Export/Logfile Format dialog box.
4
Make further selections for the format of the exported data. Press OK to close
the dialog box.
5
Press OK to export the data to the specified destination.
How to Compare Measurement Results
If you intend to repeat a measurement with different settings, you may wish to
preserve the current results for easier comparison. This can be done with all
measurements (except Error Location Capture) by copying the results.
1
In the lower left-hand corner of the measurement window, select the measured
terminal by tipping on it.
2
Select Copy from the Edit menu.
If you have a mouse connected to your Serial BERT, you can directly copy the
measurement via the context menu.
3
Open the Edit menu (or context menu) once more and select Paste.
This inserts a copy of the chosen measurement results. For an Output Levels
measurement, this looks as shown below:
6 Advanced Analysis
230 Agilent J-BERT N4903B High-Performance Serial BERT